Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Firebox and firebrick repair in Stone Crest

Local firebox pros who pick up the phone, inspect at no charge and write down every option for your Stone Crest home.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What our crew measures in the firebox

  1. Loose brick removal and resetting
  2. Raking out and repointing worn joints
  3. Firebox floor bricks relaid level
  4. Separate lines for damper, hearth or smoke chamber

Repairing the lining that holds the fire

Raking out and repointing firebox joints

Repointing restores the joints without taking the bricks out. Our crew rakes out loose and eroded mortar to a sound depth, cleans the joints and packs them with refractory mortar, finished flush with the brick face.

It suits a firebox whose bricks are still sound and tight but whose joints have worn. If probing shows the bricks themselves have moved or cracked through, repointing alone would not hold, and our estimate says so plainly.

Protecting the room during firebox work

Firebox repair happens in your living room, and soot and brick dust travel. Our crew covers the hearth, the floor and nearby furniture before starting and keeps the work area contained.

Once the brick is laid, our crew vacuums the firebox and hearth, folds away the covers and wipes down anything nearby. The room goes back to how it looked before, apart from a firebox that is sound again.

Keeping mortar dust and soot contained

Cutting out brick and raking joints creates fine dust. We use drop cloths, work from inside the opening and clean as we go so the dust stays in the firebox instead of the room.

Tell us when you book if anyone at home has breathing troubles or allergies. The crew can close off the opening more fully, group the dustiest steps together and ventilate the room when the work is finished.

How the firebox estimate is laid out

The estimate follows the firebox itself, wall by wall. The back wall, each side wall and the floor get their own entries, with the bricks to be replaced, the joints to be repointed and the refractory products named. Work that belongs to the damper, the hearth or the smoke chamber sits on separate lines further down.

At the bottom you see the total, the curing time before the first fire and the 10% discount for work booked within 72 hours after the inspection. The inspection behind it costs nothing, and the job starts only after you sign off.

A musty smell from the firebox

A damp, musty smell from the fireplace, especially after rain, usually means moisture is sitting in the firebox or the masonry above it. Wet brick and ash make that smell stronger.

Our technicians look for the source of the moisture and the damage it has caused to the lining. The firebox repair is quoted with the source, often a cap or leak above, on a separate line, so the smell does not return.

What Stone Crest homeowners ask about firebrick

Can you just coat over the cracks?

A coating can make a wall look even, but it does not replace a missing brick or restore an eroded joint. Our estimate addresses the brick and joints first and only suggests a coating where the surface underneath is sound.

Does a firebox rebuild mean tearing out the whole fireplace?

No. A firebox rebuild works inside the opening, and the facing, mantel and hearth extension usually stay in place. The estimate explains exactly what comes out and what stays.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376