Chimney flue liner installation in Storey Park
Relining that restores one continuous passage from the appliance to the top. Free inspection and 100% satisfaction guaranteed in Storey Park.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your free flue inspection in Storey Park looks at
Four points that decide which liner fits your Storey Park chimney, each priced on its own line.
- The reason for relining, stated in writing
- Top plate, liner cap and fastening
- Cleaning of the flue and smoke chamber
- Clearances to combustibles we could confirm
Our approach to chimney liners in Storey Park
Notes from our Storey Park liner installers, tied to the code and the product instructions.
Clearance for a chimney outside the walls
For a chimney built entirely outside the structure, one liner maker lists 1 inch of unobstructed airspace to combustible materials in the United States, compared with 2 inches for a chimney inside the house. Siding, trim and framing near the chimney are part of that check.
The measured clearances decide whether the listed liner can be installed plain or needs its insulation wrap, and we show you which applies. If trim or siding has been pushed tight against the masonry over the years, we point it out even when it is outside the relining scope.
Putting a stove into a fireplace chimney
A fireplace flue is sized for an open fireplace, usually far larger than a stove outlet. A stove venting into it can run with a cool, oversized flue.
Relining with a liner sized to the stove, connected to the stove collar and carried to the top, brings the flue back to the stove's needs. The stove maker's instructions set the size, and we follow them. We also check the hearth and clearances the stove will need, and list any work there separately.
Chimney height limits in liner instructions
Liner instructions set limits on the chimneys they cover. One stainless flexible system, for example, calls for a chimney at least 10 feet high and no more than 100 feet.
A short chimney, or an unusual one, may need another product or approach. We check the height against the product before recommending it. Single-story homes with low chimneys are where this comes up, and the estimate explains any product change it forces.
One continuous lining from bottom to top
During routine inspections, NFPA 211 has the inspector look through existing openings, such as the thimble, cleanout or flue top, for a continuous flue liner that is properly installed and undamaged. Gaps, missing sections and displaced tile break that continuity.
Relining restores one continuous passage from the appliance to the top. When we recommend it, we say where the continuity is broken and how the new liner closes that gap.
Other work in Storey Park
-
-
-
-
-
Learn more about chimney liner installation and reliningStorey Park services
Related chimney liner work
Chimney liner questions from Storey Park
What Storey Park homeowners ask us before a flue is relined.
Is insulation always required with a stainless liner in Storey Park?
No. It is required in some situations, such as when clearances to combustibles cannot be confirmed, and recommended in others, such as a chimney on an outside wall. We tell you which applies to your Storey Park chimney and price it clearly.
Will relining fix a fireplace that draws poorly?
It can when the flue size or temperature is the cause. Poor draw can also come from a blocked cap, a closed damper or a short chimney. We check those first and recommend relining only when it answers the actual problem.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.