Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Fireplace repair with a free inspection in Storey Park

Your Storey Park fireplace, checked from grate to damper and repaired with parts that suit it.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

The scope we write for a fireplace in Storey Park

  1. Damper plate, frame and full travel
  2. The passage from the firebox up past the damper
  3. Mantel fixings and distance from the opening
  4. Insert door gasket and baffle

Fireplace repair with the right parts and materials

Metal trim and hoods on a factory-built face

The metal pieces around a factory-built opening, such as a trim frame, a hood above the opening or grille panels, are often part of the listed system. Some are there for heat or air flow and not only for looks, and the model's manual says which. Take them off for a new look and the fireplace may no longer match what was tested.

Problems tend to appear after a refacing, when a hood is left off, a grille is painted shut or trim is bent to fit new stone. The fireplace may still light and burn, which is why the change goes unnoticed.

On site, the face is checked against the model's manual. We refit or replace the listed trim and reopen air slots that were closed off. Where a finish sits too close to the opening, the estimate says what the manual requires and what has to change, with each listed part named.

Fireplace accessories follow their listing

Glass doors, screens and grates are the add-ons most people mean by fireplace accessories. The Florida Building Code asks for listed and labeled accessories to be installed according to their listing and the maker's instructions. On a factory-built fireplace, the fireplace's own listing also decides which accessories may be added at all.

Trouble shows up when an accessory bought for one fireplace ends up in another, or when parts from different accessory kits are combined. A heat shield left out, a door bracket drilled in the wrong place or a screen that does not cover the opening can each undo what the listing expects. A grate bought for a larger firebox is one example.

Our technicians check accessories against their labels and instructions, refit them correctly and replace any that do not belong. Each accessory we checked is named in writing, along with what, if anything, changed.

Door gaskets and baffles in a wood insert

A wood-burning insert is a closed stove set into the fireplace, and it depends on a tight door. The rope gasket around the door and the glass can wear flat or fray, letting air in where it should not. Many inserts also have a baffle above the fire that guides smoke and heat, and it can crack, warp or slip out of place.

Both are model parts. The gasket size and the baffle material are set by the insert's maker, and the manual shows how they fit. A generic gasket that is too thin, or a baffle cut from other material, changes how the insert burns.

The insert's label tells us the model. We replace the gasket and baffle with the maker's parts and check the door seal before leaving. EPA guidance says to keep the doors closed except when loading or stoking a live fire, and a sound gasket is what makes that work. The model and the parts are written on the estimate as well.

Fireplaces in condos and townhomes

Condo and townhome fireplaces can share walls, roofs and sometimes chimney runs with the units around them. Some are factory-built, and their listings and manuals apply exactly as they would in a detached home.

Access and approvals add a step. An association may want notice before work, may control what happens on the roof and may require a repair to match other units. Shared parts, such as a chimney chase serving several homes, may belong to the association rather than to you. Some associations also ask for the planned dates and a description of the work in advance, and we provide both in writing.

Our crew works from inside the unit for fireplace repairs and puts the scope in writing so you can share it with the association or property manager. Anything outside the fireplace itself is listed separately, which makes approval easier to get.

Fireplace repair questions in Storey Park

Do you work on gas or electric fireplaces?

Those units go to our gas fireplace repair and electric fireplace repair services, which work from the makers' instructions. This repair service still handles the hearth, facing, mantel and masonry around them, and one estimate can cover both.

Can glass doors be added to my factory-built fireplace?

Only doors the fireplace's manual and listing allow, and a gasketed door only where the fireplace system has been tested, listed and labeled for it, as the Florida Building Code requires. We check the manual before recommending any doors.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376