Hollow or cracked chimney stucco fixed in Summerport Beach
Tell us what you see from the driveway. Our pros in Summerport Beach handle the roof work, the testing and the repair.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What goes into your stucco repair quote in Summerport Beach
Your written stucco scope in Summerport Beach starts here and shows 10% off if you book within 72 hours after the inspection.
- What the stucco is applied to, masonry or lath
- Rusted lath, bead or fasteners in the repair area
- Curing and weather protection for fresh coats
- Workmanship warranty terms on the repair
Stucco repair, step by step, for Summerport Beach homes
The points below shape the stucco repair we recommend in Summerport Beach, and each one appears in your estimate.
Why the number of stucco coats matters
Section R703.7.2 of the Florida residential code calls for at least three coats of cement plaster over lath and at least two coats where plaster goes directly onto masonry or concrete. A repair should rebuild the same build-up it replaces.
A thin skim of patch over a lathed wall leaves the repair weaker than the stucco around it, and it tends to crack along the outline. Your written estimate states how many coats each repair area gets and what each coat does. Where the existing stucco is thicker or thinner than usual, the repair follows what is actually on the wall.
Corrosion-resistant lath and fasteners
Section R703.7.1 wants the lath, and whatever fastens it, made to resist corrosion. When lath or nails inside an older finish rust, they swell and push the stucco away from the wall, and the stains that follow are often the first visible sign.
Where we open a lathed area and find rusted metal, the damaged lath in the repair area is replaced with corrosion-resistant material before new coats go on. We show you what came out and note it in your records. Sound lath beyond the repair edge is left in place and tied into the new work.
What an elastomeric coating can and cannot do
Elastomeric coatings are thick, flexible finishes. Sto, a coating maker, describes its elastomeric coatings as able to bridge hairline cracks and resist wind-driven rain.
They do not reattach hollow stucco or remove water already behind the finish. We repair loose areas and larger cracks first, then recommend a coating only where it suits the surface and the chimney. A coating over a sound, repaired finish is a sensible upgrade, while a coating over loose stucco only hides it until it falls.
Deciding between patching and a full restucco
The choice depends on how much of the finish is loose, how many patches already exist, what the chimney is built from and how visible each face is.
We explain those factors for your chimney and let you weigh them. Patching usually has the lower first cost, while a full restucco resets the whole surface at once. If budget is tight, we can phase the work, starting with the areas letting water in.
Other work in Summerport Beach
-
-
-
-
-
Learn more about stucco chimney repairSummerport Beach services
Answers about chimney stucco for Summerport Beach homeowners
Questions that come up on stucco visits in Summerport Beach, answered plainly.
Do I need to be home during the repair?
Not for most of it, since the work is outside. We like to meet you at the start to confirm access and at the end to walk through the finished repair. If that is not possible, we send a written summary.
Can you repair stucco on a chase with a metal flue inside?
Yes. On a framed chase around a factory-built chimney, we repair the stucco skin without disturbing the listed pipe and supports inside. Any concern with those parts is written up separately.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.