Local chimney crown repair in Taft
Honest crown repair for Taft. We coat what can be saved, rebuild what cannot and put it all in writing first.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What we check on your chimney crown
- Slope and drainage off the crown top
- Signs of water reaching the flue or firebox
- Weather window for coating or pouring
- 10% off any service booked within 72 hours
Crown repair with the right materials
Cap anchors set in a cracked crown
Many flue caps are fastened to the flue tile or anchored into the crown. When the crown cracks, those anchors loosen, the cap rocks in the wind and the fastener holes become another path for water.
If your cap is loose, our technicians check whether the problem is the cap or the crown holding it. Sometimes the cap only needs refastening once the crown is repaired. If the cap itself has rusted out, a chimney cap replacement goes on its own line of the estimate.
When a cap is refastened to a repaired crown, the anchors are chosen for the crown material and set so water drains away from them. Our crew seals around each one, and a cap sitting firmly on a sound crown keeps rain and animals out of the flue.
Crown clues you can spot from the ground
You can learn a lot about a crown without climbing. Stand back far enough to see the top of the chimney. Look for dark streaks below the top, broken edges, a leaning cap, plants growing up top or a crown that looks paper thin at the corners.
Tell us what you noticed when you call, even if you are unsure what it means. It helps our technician plan the visit. The inspection itself happens up close, from the roof, and costs you nothing.
Binoculars help a lot. From the street or the far side of the yard, they show cracks, broken corners and staining the naked eye misses. If you spot something you are unsure about, describe it to us and we will know where to look first.
Crown work above a metal roof
Metal roofs are slick, especially when damp, and the panels dent under point loads. Crown work over a metal roof takes careful footing and padding under anything that gets set down.
We schedule metal-roof jobs for dry conditions and protect the panels below the chimney. Concrete dust and chips are rinsed or swept off before we leave, since grit left on metal can scratch the finish long after the crew is gone.
Metal roofs also make crown debris easy to spot. Chips and dust show clearly on the panels, so our cleanup is thorough and simple for you to check. Before we leave, walk the yard with our technician and look up at the roof around the chimney together.
Crowns around a stainless liner top plate
When a metal liner has been installed in a chimney, it usually ends in a top plate that sits on the crown or the flue tile. The plate and the crown have to be sealed together so water cannot run down between them.
Our technicians check that seal during every crown inspection. If the crown is being recast, the liner top is protected during the work and resealed afterward. The estimate notes the liner connection so nothing gets overlooked.
Metal liners also expand and contract with heat, so the seal between the top plate and the crown needs some give. Our crew uses a sealant suited to that movement and checks that the rain cover on the liner is secure.
Other work in Taft
-
-
-
-
-
Crown repair answers for Taft homes
How can you tell a crown leak from a flashing leak?
Water from a cracked crown tends to show up inside the flue or the firebox, while flashing leaks usually stain the ceiling or wall beside the chimney. Both can happen at once. Our technician checks the crown, the cap, the flashing and the brick during the free inspection and tells you which one is letting water in.
What if more damage turns up once the old crown comes off?
Sometimes the top rows of brick under a failed crown are loose. If we find that, we stop, show you and explain the extra work and its price before going further. Nothing is added to the job without your approval.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.