Fireplace insert installation by local installers in Tildenville
We check the fireplace, the flue and the hearth in Tildenville before you buy. Book within 72 hours after the inspection and take 10% off.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Before any insert is ordered for your Tildenville home
The firebox, the flue and the hearth are measured in person in Tildenville, and each result lands on your estimate.
- Flue identified, checked and swept if needed
- Top plate sealed on the flue tile with a rain cap
- Old damper locked open or removed
- Existing chimney cap checked for fit with the liner
A wood insert job in Tildenville, start to finish
Each point below turns into a line on your written estimate in Tildenville.
Replacing an insert that has been in for years
An insert that went in long ago may predate the current emission limits, may connect only to a short pipe that stops at the damper, and may have been fitted with no liner to the top of the chimney at all. Its surround can also hide open gaps into the old smoke chamber.
Replacement starts with what comes out: the old unit, its surround, any short pipe and anything wedged into the damper area. Once the firebox is bare, we look at the masonry and the flue, then confirm the new model and its connection before the new unit is carried in.
A flue that is fit for a wood fire
Before any wood heater is connected, the flue it will use has to be fit for wood. Pacific states that the chimney must be suitable for wood burning and checked for buildup and obstructions, especially when it has not been used for some time. A flue that served only decorative fires, or sat unused for years, deserves that look.
We check the flue from the firebox and from the top where access allows, then tell you what we found in plain terms. When the flue needs sweeping before the liner goes in, that sweep is written into the scope rather than left as a surprise on the day.
The baffle above the fire
The baffle is the plate or row of bricks across the top of the firebox that lengthens the path of the smoke and helps it burn. Pacific's guide includes a baffle removal section, because the baffle also comes out to reach the connector through the flue outlet.
The Travis manual asks owners to check that the baffle bricks are intact with no gaps between them. We show you where the baffle sits and what a displaced brick looks like, so you can spot it after a vigorous raking.
A television above the fireplace
Warm air from an insert rises past the mantel and the wall above. The manual's clearances cover combustible materials such as a mantel and top facing; a television has its own limits from its maker.
When a screen hangs above the opening, we measure its position against the insert's mantel and top-facing clearances and explain how the heat will reach it. Sometimes the answer is a model with a lower top clearance, and sometimes it is a shelf that deflects heat.
Other work in Tildenville
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationTildenville services
Fireplace insert questions, answered for Tildenville
Undecided? These help, and the insert visit in Tildenville costs nothing.
Can you remove my old insert?
Yes. We take out the old unit and its surround, disconnect its pipe and any wiring, and haul it away when that is part of the scope. Then we look at the firebox and flue it was covering.
What is the metal tag on the fireplace back wall?
When a fireplace is modified for an insert, one maker requires a metal tag fastened to the back wall. We fit it whenever your model's manual calls for one, and it stays there for anyone who works on the fireplace later.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.