Gas log installation and replacement in Tildenville
Local specialists for vented and vent-free log sets, with prices set before work, a free fireplace check and 10% off within 72 hours after it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Log set details we put in writing in Tildenville
A firebox cannot be sized by eye from across the room. We measure it on site in Tildenville during the free inspection.
- Ash lip or recess at the front of the firebox
- Supply pressure and pipe size the manual asks for
- Glowing embers placed as the manual shows
- Removal of the old set if you want it gone
Before a log set goes into your Tildenville fireplace
Plain talk about gas logs in Tildenville, from the people who put them in.
How far the damper must stay open
A clamped damper still has to leave enough open area for the exhaust. One maker's table sets a minimum permanent opening by burner size and chimney height. With a masonry fireplace and 15 feet of chimney, it asks for 27 square inches with the smallest burner, 35 with the 24 inch and 41 with the 30 inch.
Factory-built fireplaces and taller chimneys get smaller figures in the same table. Our crew measures the actual opening once the clamp is fitted and writes the number in your record.
When the damper clamp does not fit
Not every damper blade takes the supplied clamp. For that case, one maker gives three ways out, a permanent stop, taking the damper blade out altogether or cutting the damper back until it leaves the minimum opening in its table.
Each option has tradeoffs for how the fireplace behaves when the set is off. Our specialists explain them at your home, recommend the one that fits your damper and list it on the estimate with upfront pricing.
A screen in place while the set burns
One vented log set manual requires a fireplace screen to be in place whenever the system is burning. Unless combustion air is provided another way, the screen must have openings that let air in.
The same manual gives a simple test, there is enough combustion air when every flame bends inward, into the firebox and clear of the screen. Our technicians watch for exactly that during the first burn and adjust the setup when flames lean outward.
Mantel clearance for a vent-free set
With a mantel, one vent-free manual asks for noncombustible material extending at least 8 inches above the opening and a hood accessory when that material is less than 12 inches, plus minimum distances between the opening and the mantel shelf.
If those clearances cannot be met, the same manual says the heater must be operated with the flue damper open. Our crew measures your mantel and facing and tells you which way the set can run.
Add-ons that do not belong to the set
Glass beads, extra logs and decorative extras are tempting additions. One maker lists adding accessories to its burner system among the reasons a set smokes or soots and says to shut the burner down and take off anything that does not belong.
Our crew removes non-listed extras during service and explains why. When you want a different look, we show you the accessories the listing for your set actually includes.
Other work in Tildenville
-
-
-
-
Gas log answers for homeowners in Tildenville
Question not listed? Our Tildenville gas log crew is glad to answer it by phone.
Why does the damper have to stay open with gas logs?
The exhaust from a vented set rises up the chimney, which means the flue has to stay open. One maker ships a clamp that is fixed to the damper for good and wants the damper fully open any time the set is lit. Vent-free sets have their own rules in their own manuals.
Can a vent-free log set go in a bedroom?
One vent-free manual says its heater shall not be installed in a bedroom or bathroom. The Florida fuel gas code allows only small wall-mounted unvented heaters in those rooms, under strict conditions. We recommend a different option for a bedroom fireplace.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.