Gas log installation, vented or vent-free, in Timber Springs
A log set sized to your firebox, logs placed by the diagram and a flame checked before we leave. From a family-owned team working in Timber Springs.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Checked on every gas log visit in Timber Springs
Each item below is measured or checked in your Timber Springs fireplace and matched to the log set manual before it reaches your estimate.
- Flue, damper and firebox cleaned and checked first
- Outside air ducts or clean-out doors closed if required
- Lighting and shutdown shown to you
- Manual, rating plate and tags left in place
Gas log details that matter in Timber Springs
Log set details from the family-owned crew that installs gas logs across Timber Springs.
How the set lights and what stops the gas
Florida's fuel gas code, in section 602.2, wants the main burner of a decorative set lit by direct ignition, by an igniter or by a pilot, backed by a flame safeguard. Sets listed to ANSI Z21.84, the standard for manually lighted sets, are the exception.
The flame safeguard is what stops gas to the burner when the ignition fails. Our technicians check that it works on every set we install or service, and they do not install a burner that lacks one unless its listing allows it.
Tightly built homes and vent-free sets
Newer and heavily sealed homes can hold too little outside air for an unvented heater. One vent-free manual says its heater shall not be installed in a confined space or in unusually tight construction unless provisions are made for additional air.
It defines unusually tight construction by features such as a continuous vapor retarder, gasketed or sealed openings and caulked joints around windows and doors. Our pros ask about the home's construction and recommend a vented option where the air supply is doubtful.
Leak testing every connection
Every joint made during an installation gets checked before the burner is lit. Gas appliance manuals we work from allow leak testing with a soap and water solution or an approved leak test spray and never with an open flame.
Our installers test each connection they make or disturb, including the valve, the flex connector and the burner inlet, and they repeat the check after the set has run. The test is written into the scope of every job.
Btu ratings on vented sets
Vented log sets are rated in Btu per hour like any gas appliance. One maker rates its three burner sizes at 40,000, 55,000 and 65,000 Btu per hour on either gas.
The rating matters for the gas line, which has to deliver that flow at the minimum pressure, and for the damper opening the manual requires. Our crew reads the rating for the set you choose and checks the supply against it.
Picking a log style the burner allows
Log sets come in styles from split oak to charred logs, and each burner lists the log sets made for it. One maker's manual shows several styles available for the same burner, each with its own placement instructions.
The style is your choice, within that list. Our specialists show you the options your burner allows and install the one you pick by its own diagram, since logs from another set can sit differently in the flame.
Other work in Timber Springs
-
-
-
-
-
Learn more about gas log installationTimber Springs services
Gas log answers for homeowners in Timber Springs
Question not listed? Our Timber Springs gas log crew is glad to answer it by phone.
Will gas logs work in my fireplace?
Only if the fireplace qualifies. One vented log set manual limits its burner to a wood-burning fireplace built of noncombustible material with a flue that works. In a factory-built fireplace, the fireplace's own manual has to allow the set. We check both at the free inspection.
How often should gas logs be serviced?
One vented set manual says the appliance should be examined before use and inspected at least once a year. The same manual notes that propane sets may need more frequent cleaning than natural gas sets.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.