Family-owned chimney flashing repair in Union Park
Your free flashing inspection in Union Park comes first, and anything you book within 72 hours after it is 10% off.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Inside your chimney flashing quote in Union Park
What we look at face by face in Union Park, so the repair you approve is the repair the chimney needs.
- Step flashing along both sides
- Corner folds and tabs on all four corners
- Roofing lifted around the chimney and how it goes back
- 10% off within 72 hours after the inspection, shown in writing
What goes into a flashing job in Union Park
The details below shape the repair we recommend in Union Park, and each one shows up in your written estimate.
Surface-mounted counter flashing and its limits
Some counter flashing is screwed flat to the chimney face with a bead of sealant along its top edge. That approach depends on the bead staying stuck fast to the masonry, which is a lot to ask of a joint that bakes in the sun and takes every storm.
It can be the right answer on certain finishes when it is installed carefully and checked now and then. On brick with sound mortar joints, setting the metal into a joint is usually the more durable choice. We explain both and recommend the one that suits your chimney face.
When the flashing is not the source
Water at a chimney can come from several places. A cracked crown, a missing cap, thirsty brick or open mortar above the roofline can all put water inside the chimney, and it may appear right at the roofline where the flashing takes the blame.
We check those paths before recommending flashing work. If the flashing is sound and the water is coming from higher up, we tell you so and point you to the repair that addresses it. If both need work, each gets its own line so you can see what each repair is expected to fix.
Where the chimney sits on the roof changes the flashing
A chimney that comes through at the ridge has little water above it. One in the middle of a slope faces the full flow from above. One at the eave may meet a wall, a gutter or a soffit instead of open roofing.
Each location calls for a different flashing layout. We look at where your chimney emerges and how much roof drains toward it before recommending the pieces. The back of a mid-slope chimney usually needs the most attention.
What the free inspection covers on a flashing call
A flashing call starts with a free inspection of the chimney where it meets the roof, the chimney top and, where possible, the attic side. We look at every face, each corner, the counter flashing joints and any patch material.
You get the findings and a written estimate with no charge and no obligation. Book within 72 hours after the inspection and the estimate shows 10% off, and you can book the repair on the spot or take a day or two to think.
Other work in Union Park
-
-
-
-
-
What people in Union Park ask about chimney flashing
Answers from our specialists in Union Park, with no sales pressure.
Does my chimney need a cricket?
The Florida Building Code, Residential, calls for a cricket on the ridge side of a chimney more than 30 inches wide. We measure your chimney and tell you whether the rule applies. Cricket work is quoted on its own line.
How do you decide between a repair and a full reflash?
Flashing usually wears out gradually, with spreading rust, cracked sealant, lifted counter flashing edges and opening corners. One sign alone may not leak yet. When several show on one chimney, we explain whether a repair buys real time or a full reflash makes more sense, and both options go in writing.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.