Honest chimney repair for Wedgefield homeowners
Same-day visits when the schedule allows, and nothing starts until you approve the written estimate.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Chimney repairs priced one part at a time
- Crown condition, slope and drip edge
- Rain cap, spark screen and fasteners
- Spalled or broken brick to replace
- Items for an engineer's evaluation, listed separately
Chimney repair decisions for your Wedgefield home
Spot repair or rebuilding a section
The size of a repair follows the condition of the masonry around the damage, not only the damage itself. A few spalled bricks or eroded joints in a wall that is otherwise tight and plumb can be repaired in place, brick by brick and joint by joint.
It changes when masonry has shifted or sits out of line, or when cracks run through several units. BIA maintenance guidance treats that kind of movement as structural, so the cause is found first. Setting new brick into masonry that is still moving only buys time, and the sound approach is then to take the chimney down to a solid course and rebuild from there, anchored and supported the way the Florida Building Code requires.
Before choosing, our technicians check the masonry around every damaged area. Your Wedgefield estimate shows which approach we recommend, how far down a rebuild would go if one is needed and why a smaller repair would not hold.
Chimney repairs and a new roof in the right order
If a new roof is coming, the chimney work should come first. Crown repairs, rebuilt courses, repointing and new counterflashing all happen at or above the roofline, and doing them after the roofers finish means working over and around brand new roofing at the base of the chimney.
Flashing is where the two jobs meet. The Florida Building Code requires flashing around roof openings, and at a chimney that means base flashing worked in with the roofing and counterflashing set into the masonry. Deciding who installs which layer before either trade starts keeps the laps in the right order and leaves no gap between them.
Mention the reroof at the free inspection. For homes in Wedgefield, the estimate then puts the chimney work ahead of the roofing and says which flashing layer we install and which one belongs to the roofer.
Vines and plants growing on the chimney
Ivy on a chimney can look settled and harmless, but its small shoots work into voids in the mortar and may carry moisture into them. BIA maintenance guidance lists plant growth among the things that can contribute to water getting into brickwork.
Removing it the wrong way does its own damage. The guidance says to cut vines away from the wall rather than pulling them off, which could damage the brick. The shoots left behind are allowed to dry and darken before they are brushed off with a stiff fiber brush and detergent, and chemicals or acids are not used on them.
Once the growth is gone, the joints underneath get a proper look, since BIA notes repointing may be necessary if the mortar cracks or deteriorates as the ivy comes off. Removal and any joint repair are priced as separate lines.
A chimney nobody has used for years
A fireplace that has sat unused for years is not safe just because nothing has happened. An open flue with no cap collects nests, leaves and debris. Dampers rust in place. Crowns and flashing keep aging whether anyone lights a fire or not.
The U.S. Fire Administration advises having chimneys cleaned and inspected each year by a professional, and a long gap means several of those checks were skipped. The first fire in an idle chimney should come after a full look, because a blocked flue has nowhere to send the smoke but back down.
Before that first fire, our crew in Wedgefield checks the whole system, from the cap and crown down to the damper and firebox, and clears out what has collected. Anything that needs repair is written on the estimate before the fireplace goes back into service.
Other work in Wedgefield
-
-
-
-
-
Before you schedule chimney repair in Wedgefield
What should I look for in a chimney repair company?
Look for a company that finds the cause before quoting and names each damaged part in writing. You should see the fix, the material and the price for every line, and nothing should start until you approve. Our family-owned team works that way, and the inspection that begins it is free.
Do you repair factory-built metal chimneys as well as brick ones?
Yes. A factory-built chimney is a listed system, so repairs use the maker's listed parts and follow its installation instructions, as the Florida Building Code requires. Masonry chimneys are repaired to the code's masonry rules, and the estimate says which approach applies.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.