Fireplace installation that starts at the roof line in Wedgewood Groves
Fireplace and chimney installation in Wedgewood Groves with permits, inspections and finishes planned from the start.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The written fireplace scope we leave in Wedgewood Groves
Book within 72 hours after the inspection in Wedgewood Groves and 10% off shows on the same page as these items.
- Fireplace model and placement agreed against the manual
- Hearth extension built to the manual or code
- Old fireplace and chimney removed and hauled away
- Reframing for a replacement unit
Fireplace details our installers explain in Wedgewood Groves
Useful to know before you approve a fireplace installation in Wedgewood Groves.
Along a wall, across a corner or in a chase
A factory-built fireplace offers more placement choices than masonry. One manual we work from shows the same fireplace used as a room divider, along a wall, across a corner or set in an exterior chase, with framing details for each arrangement.
Each placement changes the framing, the chimney route and how much floor the hearth extension takes. We sketch the options that suit your room during the free inspection and explain what each one would involve, so you choose the layout with the work in view.
No liquid starters, cleaners or colorants
The E-series fireplace is built for solid fuel only. Its manual says never to use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids, to keep flammable liquids a safe distance away, and not to use chimney cleaners or flame colorants in the fireplace.
We leave a short list of these rules with you at handover. A new fireplace starts easily with newspaper, dry kindling and small splits, which is how we light the first fire with you.
The footing under a masonry fireplace
A masonry fireplace and its chimney carry their weight straight down. Florida Residential Code section R1001.2 puts the fireplace on a footing of concrete or solid masonry 12 inches thick or more, reaching 6 inches or more past the fireplace or foundation wall on every side.
Adding a masonry fireplace to an existing slab or floor usually means cutting in a new footing. We explain what that involves at the planning stage, because it affects cost, schedule and whether masonry is the right choice for your room at all.
Weight, time and the case for each type
A masonry fireplace and chimney weigh many times what a factory-built system does, need a footing and are built course by course over days. A factory-built fireplace is framed in, can sit on a combustible floor where its manual allows, and goes in faster.
Neither is automatically better. We lay out the trade-offs for your house and the look you want, including what each type means for the floor, the roof and the schedule, and we recommend the one that suits the project.
Other work in Wedgewood Groves
-
-
-
-
-
Learn more about fireplace installationWedgewood Groves services
Fireplace installation questions we answer in Wedgewood Groves
Short answers from our fireplace installers in Wedgewood Groves. Anything else, just call.
How tall will the chimney be?
The code wants 3 feet or more above the roof penetration, and the top must also sit 2 feet higher than whatever part of the house is within 10 feet. We measure your roof around the planned spot and put the resulting height in the estimate.
What paperwork should stay with the house afterwards?
The manual, the model and serial number, the chimney parts list, the permit record and the date it went in. We hand them over together, and the listing label stays reachable on the unit, so a later inspection, repair or sale can start from the facts.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.