Chimney crown repair and sealing in Winter Park
A crown that sheds rain protects the whole chimney. Get a free inspection and 10% off crown repair in Winter Park booked within 72 hours after it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What your crown estimate covers in Winter Park
- Crack filling before any coating goes on
- Signs of water reaching the flue or firebox
- Separate lines for cap, flashing or masonry work
- Weather window for coating or pouring
The crown work behind a dry chimney
Water repellent for the brick after crown repair
Once the crown is sound, the brick below can still absorb rain through its face. A breathable water repellent made for masonry lets moisture escape while slowing the water coming in.
Chimney waterproofing is a separate service, and it only makes sense after the top is fixed. We mention it when the brick is clearly soaking up water and leave it off the estimate when it is not needed. The choice stays yours.
Timing matters with repellents. They go on dry brick after the crown and any masonry repairs have cured. Applied too early they trap moisture, and applied over open cracks they do little. Our technicians tell you when the chimney is ready, if you decide to go ahead.
Crowns around a stainless liner top plate
When a metal liner has been installed in a chimney, it usually ends in a top plate that sits on the crown or the flue tile. The plate and the crown have to be sealed together so water cannot run down between them.
Our technicians check that seal during every crown inspection. If the crown is being recast, the liner top is protected during the work and resealed afterward. The estimate notes the liner connection so nothing gets overlooked.
Metal liners also expand and contract with heat, so the seal between the top plate and the crown needs some give. Our crew uses a sealant suited to that movement and checks that the rain cover on the liner is secure.
Why a coating alone cannot save some crowns
A coating is a thin skin. It keeps rain out of a sound surface but cannot hold together a crown that is broken into pieces, hollow underneath or missing its edges.
When we see those conditions, we recommend a new crown and explain the reasons in writing. Selling a coating that peels in a season would cost you more in the end, and it would fall short of our satisfaction guarantee.
When a coating is not enough, the upside is that a new crown built properly can shed rain for a long time with basic care. The upfront work is larger, but you end up with a top that does not need patching every season.
Repair materials made for chimney crowns
Crown repairs call for materials made to bond to old concrete and stand up to weather on a chimney top. Ordinary bagged mortar often shrinks and cracks when it is spread thin over an old crown.
Our crew uses products suited to the repair, prepared the way the maker specifies. The estimate names the material, so you can look it up yourself or ask us anything about it.
Material choice also depends on the size of the repair. Thin repairs need products made to grip in thin layers, while larger sections need a mix that can be formed and cured like new concrete. Our crew matches the material to the repair, and the estimate says which one.
Other work in Winter Park
-
-
-
-
-
Before you book crown repair in Winter Park
Can a cracked crown be sealed instead of replaced?
Often, yes, when the cracks are fine and the concrete around them is still sound. A coating made for chimney crowns bridges small cracks once they are cleaned and filled. If the crown is hollow, broken at the edges or has no slope, sealing only delays the next leak, so we recommend a new crown instead.
How can you tell a crown leak from a flashing leak?
Water from a cracked crown tends to show up inside the flue or the firebox, while flashing leaks usually stain the ceiling or wall beside the chimney. Both can happen at once. Our technician checks the crown, the cap, the flashing and the brick during the free inspection and tells you which one is letting water in.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.