Fireplace installation that starts at the roof line in Winter Park
From a blank wall to a working wood fire in Winter Park, planned around your room, your roof and your budget.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What the fireplace plan for your Winter Park home includes
Checked once, carefully, so framing day in Winter Park starts on a settled plan.
- Listed termination cap and roof parts
- Noncombustible face finish chosen with you
- Glass doors and screen from the approved list
- Roof opening closed at the end of each day
The chimney, the framing and the fire, for Winter Park homes
What our installers look for, and why it matters, on Winter Park fireplace jobs.
Chimney parts from the same system
Factory-built fireplace manuals specify the chimney system to be used. The E-series manual we reference requires its maker's own chimney system and shows only the chimney components that may be safely used with the fireplace, from straight sections to offsets, firestops and termination caps.
Mixing parts from another brand because they look alike breaks the listing, even when the diameters match. Our estimate lists each chimney component by the system it belongs to, and we do not substitute on install day because a supplier ran short.
Firebox walls in a masonry fireplace
Section R1001.5 says masonry fireboxes shall be built of solid masonry units, hollow units grouted solid, stone or concrete. Where a firebrick lining at least 2 inches thick is used, the back and side walls must each be at least 8 inches of solid masonry, including the lining.
Those walls separate the fire from the framing of the house. When we plan a masonry fireplace, the firebox is drawn to the code's minimums first, and any design wish is fitted around them.
Fireblocking around the fireplace
Section R1001.12 ties fireplace fireblocking to section R302.11, the code's general fireblocking rules. Fireblocking closes concealed spaces in the framing so that fire cannot travel through walls and floors alongside a chimney.
Around a masonry chimney and in a chase, those details are hidden once the house is finished. We install them as the code requires, leave them visible until the inspector has seen them and only then let the drywall go up.
A new fireplace is permitted work
Florida Building Code, Building, section 105.1 requires anyone who intends to construct, enlarge, alter or repair a building, or cause such work to be done, to first apply to the building official and obtain the required permit. Adding or replacing a fireplace and its chimney falls within that kind of work.
The local building department decides what it needs to see. We tell you what applies at your address, list any permit fee separately and plan the work so inspections can happen at the right stage.
Other work in Winter Park
-
-
-
-
New fireplace questions, answered for Winter Park
Undecided? These help, and the fireplace visit in Winter Park costs nothing.
Do I need outside air for the fireplace?
The code generally wants an outside air supply, unless mechanical ventilation keeps the room at neutral or positive pressure. One maker notes that adding an outside air kit later means significant reconstruction, so we plan it from the start.
Can the fireplace go in a corner or inside a chase outside the wall?
Often it can. A factory-built fireplace may stand along a wall, across a corner, between two rooms or in an exterior chase, and one manual we use draws the framing for each. Every spot changes the chimney route and the hearth, so we sketch the choices for your room at the free inspection.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.