Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Family-owned gas fireplace insert installation in Wyndham Lakes

Local pros who clean and check the chimney before a gas insert in Wyndham Lakes is ever connected to it.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Gas insert scope we confirm in Wyndham Lakes

Items like these make an insert quote in Wyndham Lakes easy to compare, because each has its own line and its own price.

  1. Rear width and side angles measured, beyond the face of the opening
  2. Exhaust and intake liners from the insert collars to the chimney top
  3. Vertical vent height checked against the insert's minimum and maximum
  4. Plates or insulation closing the gap around the liners at the damper

Gas insert installation points for Wyndham Lakes homes

Plain answers about how gas inserts are installed in Wyndham Lakes, and why each step matters.

One flue for one appliance

Every insert needs a vent of its own. Heat & Glo forbids tying the insert into a chimney flue that already serves another solid-fuel or gas-burning appliance and calls for a separate vent system. Section 503.5.7.1 of Florida's Fuel Gas Code likewise bars connecting an appliance to a flue that serves a separate solid-fuel appliance.

In a chimney with one flue, that is simple. Where a chimney holds two flues, for example serving a second fireplace, we identify which flue the insert will use and keep it apart from the other appliance.

A shutoff valve within reach

Every gas appliance needs its own shutoff valve. Section 409.5.1 of Florida's Fuel Gas Code says the valve must be in the same room as the appliance, within six feet of it, upstream of the connector and accessible. Valves placed in a fireplace firebox follow the appliance maker's instructions.

Inserts often put the valve behind a removable panel or low in the firebox area. We show you where yours is at the walkthrough and how to reach it, including any tool the maker supplies for turning it.

How a wall switch is wired

A wall switch for a gas insert is a low-voltage control. The manual is specific: do not wire 110 to 120 volts to the wall switch, and do not connect the power cord of an electronically controlled insert to a switched circuit, because that can override its safety lockout.

If you want a wall switch, we fit the maker's switch kit and connect it as the diagram shows. Power to the insert stays constant, and the switch simply tells the control when to light.

Ember material, placed by the diagram

Glowing ember material adds to the look of a gas fire, and it has rules too. The Supreme manual says embers cannot be placed over marked burner ports or in the pilot area, must be laid loosely in a single layer no more than a quarter inch thick, and should be replaced annually.

Too much ember, or ember pressed into the ports, causes lighting trouble and soot. We place it by the diagram and leave the spare material with you for the yearly service.

Wyndham Lakes homeowners ask about gas inserts

Answers from the family-owned team that fits gas inserts in Wyndham Lakes.

Does the chimney need cleaning before the insert goes in?

Yes. Florida's Fuel Gas Code says a chimney that vented a wood fire must be examined and cleaned before a gas appliance is connected to it. We clean it as part of preparing the fireplace.

Can I put a TV above my gas insert?

Often, if the mantel and the distances in the maker's guidance work and the TV's temperature limit allows it. We check the insert's clearance table and the TV's specifications before the bracket goes up.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376