Fireplace installation that starts at the roof line in Bay Ridge
Fireplace and chimney installation in Bay Ridge with permits, inspections and finishes planned from the start.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The written fireplace scope we leave in Bay Ridge
Book within 72 hours after the inspection in Bay Ridge and 10% off shows on the same page as these items.
- Roof height set by the ten-foot rule
- Listed termination cap and roof parts
- Framed opening and header set to the standoffs
- Our workmanship warranty on the fireplace work we do
Fireplace details our installers explain in Bay Ridge
Useful to know before you approve a fireplace installation in Bay Ridge.
Firestop spacers at every floor and ceiling
Where the chimney passes through a floor or ceiling, a firestop spacer is required at each penetration. The spacer holds the chimney centered in the opening, keeps the required air space and helps block the spread of fire between floors.
The spacers are nailed to the framing as the manual shows, and in an attic they also keep insulation from falling into the air space. We list the number of spacers your route needs in the estimate, one for each floor or ceiling the chimney crosses.
Inspect and clean before the season
The E-series manual asks owners to inspect and clean the fireplace and chimney prior to use and periodically during the burning season, to keep a safe system and prevent soot buildup. NFPA 211 has chimneys and fireplaces inspected yearly, looking at soundness, deposits and whether clearances are correct.
A new fireplace is the easiest to keep in order. We note the install date and chimney parts in your records, so the first yearly visit starts with the facts.
Adding a fireplace where there has never been one
Adding a fireplace to a room that has never had one begins with the route. The mantel comes later. The chimney has to reach the roof within the offset limits, clear the ten-foot rule and pass through floors and attics without cutting structure it depends on.
We check those limits for each wall you are considering, then talk about appearance. Often one wall that looks ideal fails on the route, and a nearby wall works well. Learning that at the free inspection costs nothing.
A fireplace set across a corner
A corner fireplace saves floor space and can face the seating well, but it changes the framing. The unit sits in a triangular cavity, the hearth extension angles out into the room and the chimney route above has to clear the corner framing.
The manual shows corner framing for models that allow it. We frame to that drawing, check the air space at the back corners and make sure the hearth extension still reaches where the listing requires.
Other work in Bay Ridge
-
-
-
-
-
-
Answers on adding a fireplace for Bay Ridge households
Honest answers from our Bay Ridge fireplace specialists, no pressure attached.
Is a masonry fireplace better than a factory-built one?
Neither is automatically better. Masonry is heavier, needs a footing and takes longer to build; factory-built frames in faster and lighter. We lay out the trade-offs for your house and recommend the one that suits it.
Do I need outside air for the fireplace?
The code generally wants an outside air supply, unless mechanical ventilation keeps the room at neutral or positive pressure. One maker notes that adding an outside air kit later means significant reconstruction, so we plan it from the start.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.