Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Restucco and chimney stucco repair in Bel Air

Loose stucco only gets looser. Call our Bel Air team for a free inspection and a repair sized to the damage.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Checked before any stucco comes off in Bel Air

Every item here is checked on your Bel Air chimney and written into the estimate you approve.

  1. Cracks mapped by location, length and width
  2. Hollow or loose areas found by sounding each face
  3. Finish texture and how the match will be made
  4. Weep screed and clearance at the chimney base

Chimney stucco done properly in Bel Air

What our pros look at, and why, on stucco chimneys in Bel Air.

What stucco on a chimney actually is

Chimney stucco is a cement-based plaster applied in coats over block, brick or a framed and lathed chase. Section R703.7 of the Florida Building Code, Residential, points to ASTM C926 for applying portland cement plaster and to ASTM C1063 or C1787 for the lath beneath it.

Which of those assemblies sits under your finish is the first thing we settle on the roof. It decides how deep a repair goes, whether lath is involved and which materials belong in the patch, so the estimate describes your chimney rather than a generic stucco job. If the answer is unclear from outside, we say so and explain how we would confirm it before any cutting starts.

Why the number of stucco coats matters

Section R703.7.2 of the Florida residential code calls for at least three coats of cement plaster over lath and at least two coats where plaster goes directly onto masonry or concrete. A repair should rebuild the same build-up it replaces.

A thin skim of patch over a lathed wall leaves the repair weaker than the stucco around it, and it tends to crack along the outline. Your written estimate states how many coats each repair area gets and what each coat does. Where the existing stucco is thicker or thinner than usual, the repair follows what is actually on the wall.

Chimney stucco that matches the house walls

When the chimney and the house share one stucco finish, the repair has to fit the wall around it as well as the chimney itself.

We look at the wall finish too and explain how the repair will sit next to it. If the house has been painted, repainting the chimney face often gives the most even result. If the wall itself has cracks near the chimney, we note them too, even though they fall outside the chimney scope.

A second opinion on a stucco quote

If you have been told the whole chimney must be rebuilt because of cracked stucco, a second look is reasonable. Stucco damage often looks worse than the structure behind it. We look at the same cracks, sound the same faces and explain what we find in plain words.

Our free inspection gives you an independent read on what the finish and the masonry need. You decide with two views in hand. If a rebuild really is the right call, we tell you that too and explain why.

Answers about chimney stucco for Bel Air homeowners

Our family-owned team in Bel Air answers the stucco questions homeowners raise before booking.

Do hairline stucco cracks need repair?

Many hairline cracks are not serious on their own. We check the stucco around each one, and if it is sound, sealing the lines with a matching finish material or a suitable coating is usually enough. Cracks with hollow stucco or rust around them need a deeper repair.

Can you repair stucco on a chase with a metal flue inside?

Yes. On a framed chase around a factory-built chimney, we repair the stucco skin without disturbing the listed pipe and supports inside. Any concern with those parts is written up separately.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376