Wood stove inserts installed and lined in Catalina
Replacing an old insert in Catalina? We take it out, look at what it hid and install the new one properly.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Insert installation items we confirm at your Catalina fireplace
Upfront pricing sits beside each item, so you can see where the insert budget goes in Catalina.
- Flue identified, checked and swept if needed
- Metal altered-fireplace tag fastened to the back wall
- First fire lit together and controls explained
- Existing chimney cap checked for fit with the liner
What a proper insert installation involves in Catalina
From our family-owned crew, the details that decide how an insert burns.
What a wood-burning insert changes about an open fireplace
A wood-burning insert is a closed steel or cast iron firebox with a glass door that slides into the opening of an existing fireplace. The fire burns behind that door on an air supply the owner controls, and the smoke leaves through a liner connected to the collar on top of the unit.
An open fireplace pulls a steady stream of room air up the chimney, with a lively fire or a dying one. A sealed firebox burns on a measured supply, so more of the heat stays in the room. Our installers walk through that difference at the free inspection, before any model is chosen.
Cooling air paths in a metal fireplace stay open
Factory-built fireplaces often have louvers and air channels that keep their outer casing cool. Pacific's guide says the air flow within and around the fireplace must not be altered by the insert, which means no blocked louvers and no covered cooling inlets or outlets, including the circulating chambers of steel heat-circulating fireplaces.
We locate those openings before the surround is sized, so it trims the insert without closing a vent the fireplace depends on. If a surround would cover one, a different surround or a different insert is the answer.
Sizing heat output to the room
EPA's guidance on choosing a wood heater stresses matching its size to the space it will heat. An oversized insert usually gets run with its air turned down so the room does not overheat, and that is exactly how it ends up making more smoke.
We ask how big the room is, how much it opens onto the rest of the house and how often you plan to burn. That conversation usually narrows the models more usefully than the brochure does.
Protecting floors and furniture on install day
An insert installation carries a heavy unit, sooty old parts and a coil of liner through the house. Our crew lays protection along the route from the door to the hearth and covers furniture close to the work.
The firebox is cleaned before the insert goes in, and the work area is cleaned again when we finish. Both steps are part of the written scope, so the room you get back is the room you lent us, with a new fire in it.
Other work in Catalina
-
-
-
-
-
Learn more about wood-burning fireplace insert installationCatalina services
Asked by Catalina homeowners before an insert goes in
If we missed your question, our Catalina insert team answers the phone.
Do I need a liner for a wood insert?
Most insert makers call for a stainless liner from the insert collar to the top of the chimney, and some also allow a short direct connection into the first flue tile. In a factory-built fireplace, one maker requires the full liner. We follow your model's manual.
Will my hearth be big enough?
Insert manuals set how far the noncombustible hearth must reach in front of and beside the opening, and whether a flush hearth needs to reach further. We measure yours and write any extension into the estimate.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.