Chimney flashing repair for Cypress Springs homes
One local family team inspects, estimates and repairs chimney flashing in Cypress Springs, and explains every step along the way.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your free flashing inspection in Cypress Springs looks at
Checked and noted by our local family team in Cypress Springs, then explained in plain language.
- Apron flashing across the downhill face
- Corner folds and tabs on all four corners
- Findings that need a separate decision
- 10% off within 72 hours after the inspection, shown in writing
What goes into a flashing job in Cypress Springs
Three parts of the job our flashing specialists explain to homeowners in Cypress Springs before any metal is ordered.
When a chimney is wide enough to need a cricket
A cricket, which some roofers call a saddle, is a little ridged roof framed on the uphill side of the chimney so water parts around it. Section R903.2.2 of the Florida Building Code, Residential, calls for a cricket or saddle on the ridge side of any chimney more than 30 inches wide, measured perpendicular to the slope.
We measure the chimney and tell you whether it falls under that rule. Building or rebuilding a cricket is its own job with its own framing and roofing, so when one is missing or failing we write it up on a separate line, next to the flashing repair it connects to.
Where sealant does belong in a flashing job
Sealant has a real role in chimney flashing. It closes the joint where counter flashing enters the masonry, seals seams between pieces and fills the hidden side of bends. What it should not do is stand in for missing metal or bridge an open gap by itself.
The product matters too. A roof sealant has to suit the metal, the masonry and the heat and sunlight it will face. We name the product in your written scope and apply it only where the flashing design calls for it, so a later roofer or chimney crew can see exactly what was used and where.
Surface-mounted counter flashing and its limits
Some counter flashing is screwed flat to the chimney face with a bead of sealant along its top edge. That approach depends on the bead staying stuck fast to the masonry, which is a lot to ask of a joint that bakes in the sun and takes every storm.
It can be the right answer on certain finishes when it is installed carefully and checked now and then. On brick with sound mortar joints, setting the metal into a joint is usually the more durable choice. We explain both and recommend the one that suits your chimney face.
A chimney beside a taller wall
When a chimney sits against a second-story wall, the flashing has to work with the wall's weather barrier and cladding as well as the roof. Water running down the wall and down the chimney can meet at the same inside corner.
We check that the flashing at that corner turns water onto the roof and away from the wall. Repairs here can involve cladding, so we explain how much is disturbed and how it is restored before any work starts.
Other work in Cypress Springs
-
-
-
-
- Stone Chimney RepairKeep stone repairs suited to the existing masonry.
- Fireplace InstallationPlan the fireplace before opening the wall.
Learn more about chimney flashing repairCypress Springs services
What people in Cypress Springs ask about chimney flashing
Short answers from our chimney team in Cypress Springs. Call for anything not covered here.
Can you repair the flashing on just one side?
Sometimes. If the other faces are sound and the new piece can lap correctly into the old, a one-side repair can work. When a full reflash is worth considering, we price both options in writing.
Can I check the flashing myself?
From the ground, yes. Binoculars show lifted metal, rust and tar patches without the risk of climbing. Tell us what you see, and we handle the roof work.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.