Chimney repointing by local pros in Fullers
From the first chisel to the final brush, one family crew handles chimney tuckpointing in Fullers.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The joint plan our Fullers crew puts on paper
These choices decide how the new joints look and perform, so we settle them with you in Fullers.
- Joints to repoint, mapped face by face
- Mortar type chosen for the brick
- Loose or spalled units priced separately
- Roof, gutter and yard protection
How our crew repoints a chimney in Fullers
Each point below affects the joint work we recommend in Fullers and shows up in your written scope.
Hairline cracks along the joints
Fine cracks that follow the mortar joints are a warning, even when the mortar around them still feels hard. They let water into the joint during every rain and can widen as the masonry wets and dries.
When we find hairline cracking on a chimney in Fullers, we check whether it is confined to the surface or runs deeper. Surface cracks in sound mortar may be handled with a lighter repair. Cracks through the depth of the joint are raked out and repointed like any other failed mortar. Catching them at this stage keeps the repair small.
Spalled brick beside open joints
Bricks whose faces have flaked or popped off often sit next to eroded joints, because both are signs of water in the wall. Repointing the joints does not repair a spalled brick.
When we find spalled units on your Fullers chimney, they are listed for replacement as their own item. The replacement bricks go in first, and the surrounding joints are then repointed together, so the finished face is sound and consistent. Replacement units are matched as closely as practical in color and size, and the estimate says how close we expect to get.
Packing mortar into the back corners
The first layer matters most for bond. Preservation Brief 2 describes applying it firmly and packing it well into the back corners of the joint, where voids would otherwise be left behind.
Our masons use pointing tools sized to your joints, pressing each lift into the slot instead of just laying it on. On chimneys in Fullers, that dense, fully packed joint is what keeps water from finding a hollow path behind the face. A pointing trowel or tuck tool the width of the joint makes that pressure possible.
Other work in Fullers
-
-
-
-
-
What Fullers homeowners ask about chimney mortar
Deciding on joint work? The inspection in Fullers is free.
How deep do you remove the old mortar?
To at least twice the width of the joint, generally about 3/4 inch on typical brick, and further wherever the mortar is still loose. We stop at sound mortar and keep the depth even across each area.
Should I seal the chimney after repointing?
Not right away. Industry guidance advises waiting several months after repairs before deciding on a water repellent, since coatings can trap moisture. We can talk through the options once the mortar has cured.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.