Leaking chimney flashing repaired in Hibiscus
Local specialists replace chimney flashing in Hibiscus with metal and methods matched to your roof covering. No hidden fees.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What we check on Hibiscus roofs before reflashing
Every line here is part of the free inspection in Hibiscus, with no charge and no obligation.
- Counter flashing and the joints that hold it
- Roofing lifted around the chimney and how it goes back
- Tile to lift and reset, on tile roofs
- Mortar condition where counter flashing anchors
Our approach to chimney flashing in Hibiscus
Three parts of the job our flashing specialists explain to homeowners in Hibiscus before any metal is ordered.
Where the chimney sits on the roof changes the flashing
A chimney that comes through at the ridge has little water above it. One in the middle of a slope faces the full flow from above. One at the eave may meet a wall, a gutter or a soffit instead of open roofing.
Each location calls for a different flashing layout. We look at where your chimney emerges and how much roof drains toward it before recommending the pieces. The back of a mid-slope chimney usually needs the most attention.
Painting flashing to match the chimney
Some homeowners want the flashing painted to match the brick, the stucco or the roof. Paint can protect certain steels and make the junction less noticeable from the street, but it must suit the metal and go on a clean, prepared surface.
We tell you which flashing metals take paint well and which are better left bare. If you choose paint, the product and color are recorded in your scope so the finish can be matched later.
A skylight close to the chimney
A skylight near the chimney has its own flashing, and the two can share a strip of roof. Water that gets past one can show up beside the other. Skylights also come with their maker's own flashing kits, which govern that side of the repair.
We check both when they sit close together and tell you which one is letting water in. If the skylight flashing needs work, we point you to the right trade or include it in writing when we agree to handle it.
An unused chimney still needs sound flashing
A fireplace that is never lit does nothing to protect the roof junction. Water gets in at the flashing whether or not the chimney is used, and it can damage framing and ceilings quietly over time.
Unused chimneys often go unchecked for years because nobody thinks about them. If yours has not been looked at in a while, a free inspection of the flashing, crown and cap can catch problems while they are still small. The check is free and takes one visit, and the findings tell you whether the chimney needs work before the next storm season.
Other work in Hibiscus
-
-
-
-
-
Chimney flashing questions from Hibiscus
Answers from our specialists in Hibiscus, with no sales pressure.
Could our downspout be part of the problem?
It can. When an upper roof drains onto the roof beside the chimney, one flashing face takes the whole stream, and even good flashing can be overwhelmed. We check where upper downspouts empty. Moving or extending one is gutter work, which we point out and leave to you or your gutter contractor unless we agree otherwise.
Can the new flashing be painted to match?
Some metals take paint well and some are better left bare, and paint only holds on a clean, prepared surface. We tell you which is which for your flashing. If you choose paint, the product and the color go into your written scope, so the finish can be matched later.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.