New gas fireplaces installed in Hibiscus
Our Hibiscus crew plans framing, venting, gas and power together, so install day runs to plan.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Measured, checked and priced in Hibiscus
Before any framing in Hibiscus, our installer checks points like these against the manual for the model you want.
- Vent configuration, rear or top, with elbows counted
- Gas supply by a qualified gas professional, on its own line
- Mantel height and depth checked against the manual's chart
- Controls, manuals and model details handed over
Gas fireplace installation know-how for Hibiscus
Some of what our installers explain to Hibiscus homeowners before any wall is opened.
Supporting the vent run
Vent pipe needs support along its length so it does not sag or separate. In the Novus manual, horizontal sections are supported every five feet, and vertical sections every eight feet after a maximum unsupported rise of twenty-five feet, using the vent support or plumber's strap.
The same manual warns that the vent must not sag below its connection to the appliance. Our crew installs the supports as the run goes in, so the pipe keeps its line through the wall, the attic or the chase.
Wall switches and thermostats
Control options include a wall switch, a wall thermostat, a remote or a combination. The Novus manual says a thermostat on a standing pilot unit must suit a millivolt gas valve, and that low-resistance wire should run from the ignition system to the switch or thermostat, kept as short as possible.
It also says low voltage and 110 volt wiring cannot share the same wall box. We plan the switch location and the wire route with the framing, so the controls end up where you want them and wired as the manual shows.
Logs placed to the diagram
Gas fireplace logs are not decoration you arrange by eye. The Novus manual notes that the logs may be packed separately and installed in the field, and lists improper positioning of the logs among the actions that void the warranty.
Each log has a place on the diagram, and the flame pattern depends on it. Our installer sets the logs to the drawing, lights the fireplace and adjusts only as the manual allows until the flame looks right and the glass stays clean.
Other work in Hibiscus
-
-
-
-
-
Learn more about gas fireplace installationHibiscus services
Related gas fireplace install work
Questions we hear in Hibiscus about gas fireplaces
Weighing up a new fireplace? Start here, then book the free visit in Hibiscus.
Can I use the 72-hour discount on a new fireplace?
You can. A new gas fireplace installation booked within 72 hours after your free inspection is 10% off. Mention it on the phone and the saving is written into your estimate.
Do you handle the drywall and tile around the fireplace?
The estimate spells out the finish work and who does it. We build the framing and noncombustible zone to the manual and coordinate the facing, so the finishes go on without breaking a clearance.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.