Fireplace installation and prefab replacement by local pros in Lake Holden
Measured, planned in writing and installed to the listing. That is how our Lake Holden team builds every fireplace.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What the fireplace plan for your Lake Holden home includes
Checked once, carefully, so framing day in Lake Holden starts on a settled plan.
- Fireplace model and placement agreed against the manual
- Listed chimney sections, firestops and attic shield
- Reframing for a replacement unit
- First fire lit together and controls explained
The chimney, the framing and the fire, for Lake Holden homes
What our installers look for, and why it matters, on Lake Holden fireplace jobs.
Type HT chimney for a wood-burning fireplace
Wood fires need a chimney rated for them. Section R1005.3 requires factory-built chimneys in homes with solid-fuel-burning appliances to meet the Type HT requirements of UL 103, marked Type HT and Residential Type and Building Heating Appliance Chimney.
For a factory-built fireplace, the chimney that meets that requirement is the one its manual names. We check the marking on the pipe we install and on any existing pipe we are asked to reuse, because a chimney without the right marking is not one we connect a wood fire to.
Along a wall, across a corner or in a chase
A factory-built fireplace offers more placement choices than masonry. One manual we work from shows the same fireplace used as a room divider, along a wall, across a corner or set in an exterior chase, with framing details for each arrangement.
Each placement changes the framing, the chimney route and how much floor the hearth extension takes. We sketch the options that suit your room during the free inspection and explain what each one would involve, so you choose the layout with the work in view.
Leveling the fireplace and squaring the opening
The E-series manual asks for the fireplace to be leveled side to side and front to back, shimmed with noncombustible material such as sheet metal, and secured to the framing with its nailing flanges. To make sure glass doors fit, it asks for the diagonals of the opening to be measured and made equal.
A fireplace set slightly out of square looks fine until the doors are hung. We level and check the diagonals before the unit is fastened, so the doors, the face finish and the hearth all line up later.
Mantel height above a factory-built fireplace
Mantel rules for a factory-built fireplace come from its manual. In one example, a combustible mantel may sit no lower than 12 inches above the top of the fireplace opening and may have a maximum depth of 12 inches, and the maker states this clearance follows a section of NFPA 211.
Other models give other figures, so the mantel height is read from your manual before it is set. We mark the mantel line on the framing during installation, so the mantel you choose later lands where the listing allows.
Other work in Lake Holden
-
-
-
-
-
Fireplace installation questions we answer in Lake Holden
Undecided? These help, and the fireplace visit in Lake Holden costs nothing.
Is a masonry fireplace better than a factory-built one?
Neither is automatically better. Masonry is heavier, needs a footing and takes longer to build; factory-built frames in faster and lighter. We lay out the trade-offs for your house and recommend the one that suits it.
Does a new fireplace need a permit?
A new or replacement fireplace and chimney is permitted work under the Florida Building Code. We check what the building department asks for at your address, list any fee separately and keep framing open for inspection.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.