Local fireplace installers for Lake Pickett, route checked first
We check the chimney route, the structure and the room in Lake Pickett before you choose. Book within 72 hours after your free inspection and take 10% off.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What the fireplace plan for your Lake Pickett home includes
Checked once, carefully, so framing day in Lake Pickett starts on a settled plan.
- Listed chimney sections, firestops and attic shield
- Masonry footing, firebox and hearth to code
- Old fireplace and chimney removed and hauled away
- Roof opening closed at the end of each day
The chimney, the framing and the fire, for Lake Pickett homes
What our installers look for, and why it matters, on Lake Pickett fireplace jobs.
The ten-foot rule at the roof
Florida Residential Code section R1003.9 requires a chimney to extend at least 2 feet higher than any portion of a building within 10 feet, and at least 3 feet above the highest point where it passes through the roof. The E-series manual repeats the same rule for its chimney.
The rule protects draft and keeps sparks and exhaust away from the roof. We measure the roof around the planned penetration, including nearby ridges and taller parts of the house, and the chimney height on the estimate comes from that measurement.
Inspect and clean before the season
The E-series manual asks owners to inspect and clean the fireplace and chimney prior to use and periodically during the burning season, to keep a safe system and prevent soot buildup. NFPA 211 has chimneys and fireplaces inspected yearly, looking at soundness, deposits and whether clearances are correct.
A new fireplace is the easiest to keep in order. We note the install date and chimney parts in your records, so the first yearly visit starts with the facts.
Weight, time and the case for each type
A masonry fireplace and chimney weigh many times what a factory-built system does, need a footing and are built course by course over days. A factory-built fireplace is framed in, can sit on a combustible floor where its manual allows, and goes in faster.
Neither is automatically better. We lay out the trade-offs for your house and the look you want, including what each type means for the floor, the roof and the schedule, and we recommend the one that suits the project.
Checking the draft on the first fire
The first fire in a new fireplace is also the first test of the whole system. With the damper open, smoke should rise cleanly into the top of the firebox, and the house should not pull it back into the room when a door opens or the air conditioning starts.
We watch that first fire with you, check the draft with the doors open and closed and look at the chimney top once the fire is going. If anything needs adjusting, we say so on the spot rather than after we have packed up.
Other work in Lake Pickett
-
-
-
-
-
Learn more about fireplace installationLake Pickett services
Answers on adding a fireplace for Lake Pickett households
Honest answers from our Lake Pickett fireplace specialists, no pressure attached.
Can the fireplace go in a corner or inside a chase outside the wall?
Often it can. A factory-built fireplace may stand along a wall, across a corner, between two rooms or in an exterior chase, and one manual we use draws the framing for each. Every spot changes the chimney route and the hearth, so we sketch the choices for your room at the free inspection.
Will our roof be left open overnight?
No. The chimney goes through a framed opening between rafters or trusses and is closed with the listed roof parts and a storm collar. Any open roof is covered at the end of each working day, and the estimate says how we reach the roof and protect it while we work.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.