Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney crown repair in Lake Richmond

We seal fine cracks or cast a new sloped crown, then show you the finished work. Free inspection and 10% off when you book within 72 hours after it.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Your crown repair estimate, line by line

  1. Crown coating where the concrete is sound
  2. Roof protection below the work area
  3. Signs of water reaching the flue or firebox
  4. Separate lines for cap, flashing or masonry work

Crown repair facts for Lake Richmond homeowners

Cap anchors set in a cracked crown

Many flue caps are fastened to the flue tile or anchored into the crown. When the crown cracks, those anchors loosen, the cap rocks in the wind and the fastener holes become another path for water.

If your cap is loose, our technicians check whether the problem is the cap or the crown holding it. Sometimes the cap only needs refastening once the crown is repaired. If the cap itself has rusted out, a chimney cap replacement goes on its own line of the estimate.

When a cap is refastened to a repaired crown, the anchors are chosen for the crown material and set so water drains away from them. Our crew seals around each one, and a cap sitting firmly on a sound crown keeps rain and animals out of the flue.

Crown repair and a new cap in one trip

When both the crown and the cap need work, doing them together saves a second trip up the roof. Crown work comes first, a repair or a full recast, and the cap is fastened on only when the new surface will hold its anchors.

We still price them as separate lines because they are separate parts. You can approve the crown now and the cap later, or both at once. When both are done together, our crew fits the cap and checks it before the ladder comes down.

Some caps cover several flues at once and rest on the crown itself. Those need a crown that is flat enough where the cap sits and sloped everywhere else. Our crew plans the crown with the cap in mind, so the two work together from day one.

What a crown repair covers

A crown repair keeps the existing crown and fixes its defects. That can mean cleaning and filling cracks, rebuilding a broken corner, renewing the sealant at the flue and coating the surface.

The estimate names each step and the product used. If part of the crown is beyond repair, we say so plainly instead of stretching the repair to fit. Our family-owned team would rather give you the right answer than the one that sounds easiest today.

Crown repairs are often finished in one visit, depending on the products and the weather. We explain the schedule and any cure time before starting, so you know when the fireplace can be used again and when the repair will be fully set.

No surprise charges on crown work

Crown work sometimes uncovers more once the old surface comes off. When that happens, our crew stops, shows you what they found and explains the options before anything else is done.

We work with upfront pricing and no hidden fees. If extra work is needed, you approve it first, in writing. If you would rather wait, we finish what was agreed and leave the chimney top weather-tight.

If you are away when something turns up, we call, explain what we found and wait for your answer. Extra work only happens with your approval, and it appears on a revised written estimate before anyone starts it.

Crown repair questions we hear often

Can a cracked crown be sealed instead of replaced?

Often, yes, when the cracks are fine and the concrete around them is still sound. A coating made for chimney crowns bridges small cracks once they are cleaned and filled. If the crown is hollow, broken at the edges or has no slope, sealing only delays the next leak, so we recommend a new crown instead.

Does a new crown come with a new cap?

Not automatically. If your cap is rusted or loose, we list a cap replacement as its own line so you can decide. When both are done together, the cap is fitted after the crown has cured enough to take fasteners.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376