Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney sweep and flue cleaning in Lake Weldona

Call our local crew in Lake Weldona for chimney sweeping backed by our 100% satisfaction guarantee.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

The work behind a clean flue

  1. Extra passes for heavy buildup priced up front
  2. Each flue matched to its fireplace or stove
  3. Repair findings listed on separate estimate lines
  4. Roof area around the chimney covered

Chimney sweep work from the roof down

Brushing the smoke chamber above the damper

Above the damper, the smoke chamber funnels smoke from the wide firebox into the narrower flue. Its walls slope inward, and deposits collect on those slopes where a straight flue brush passes them by. A factory-built fireplace has no masonry smoke chamber, and its metal transition above the firebox is cleaned the way its maker directs.

The Florida Building Code calls for the inside of a masonry smoke chamber to be parged smooth with refractory mortar. A smooth surface brushes clean. A rough or stepped surface, with brick edges showing, holds soot on every ledge and takes more work to clean.

Our technicians brush the smoke chamber from below with a brush shaped for its angled walls, then look at the parging once it is visible. Missing or crumbling parging becomes a separate repair item for your Lake Weldona home, while the sweep still cleans what is there.

Top-sealing dampers, cables and gaskets during a sweep

A top-sealing damper closes the flue at the top instead of above the firebox. A spring holds its lid open, and a cable runs down the flue to a handle inside the fireplace that pulls it shut. A gasket on the lid seals against the top of the flue when it closes.

Sweeping a flue with one of these takes care. The cable hangs inside the flue, so brushes have to work around it without kinking or snagging it. Soot on the gasket keeps it from sealing, and creosote on the spring can slow the lid.

With the lid open, our crew brushes around the cable, wipes the gasket clean and tests the lid from the handle before leaving. A torn gasket, a frayed cable or a weak spring is written up as a separate repair on your estimate.

Glass doors on a masonry fireplace and soot

Glass doors on a masonry fireplace collect soot on the inside of the glass and in the frame. A heavy black film that returns quickly is a hint that fires may be burning with too little air.

During the sweep our technicians open the doors or lift them off, clean the frame and tracks where soot has built up and wipe down the glass. The doors go back on only after the firebox and damper are done, so nothing falls onto a clean frame.

Doors on a factory-built fireplace are a different matter. The Florida Building Code allows a gasketed door on a factory-built fireplace only when the fireplace system is tested, listed and labeled for it. If aftermarket doors are on a factory-built unit, our crew points it out and notes it for a separate review.

Save 10% on chimney cleaning booked within 72 hours

Any service booked within 72 hours after your free inspection is 10% off, and a chimney cleaning is a good place to use it. The discount is written onto your estimate, so you see it before you approve anything.

The offer does not change the work. The free inspection comes first, the room is protected, every part of the flue the brushes can reach is cleaned and the visual check ends the visit. The crew and the tools are the same as on any other visit. Any repair found is quoted on its own, and you decide on it on its own.

Mention the offer when you set up the visit in Lake Weldona. If the sweep leads to a repair you approve within 72 hours after the inspection, the 10% discount applies to it too.

Chimney cleaning answers for Lake Weldona homes

What happens if you find damage during the sweep?

We stop, show you what we found and explain what it means for using the fireplace. Each repair goes on the written estimate as its own line, and nothing is fixed or charged without your approval.

Can I use the fireplace the same day it is swept?

Usually, yes, once our crew has finished and the damper has been tested. The exceptions are a glazed treatment that is still drying and a repair finding that should be settled first, and we tell you about either before we leave.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376