Firebox repair for Lockhart homes
Firebrick to ASTM standards, refractory mortar and thin joints, with prices set before the first brick comes out.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Every wall of the firebox, on paper
- Tap test of every firebrick
- Raking out and repointing worn joints
- Joint at the facing edge
- Separate lines for damper, hearth or smoke chamber
From one cracked brick to a new lining
White deposits on the firebrick
A white, powdery film on the firebrick is usually salts carried to the surface by water moving through the masonry. It is a clue that moisture is reaching the firebox, even if you have never seen it drip.
We note where the deposits appear and look for the source before repairing the brick. Brushing the film away hides the clue without fixing anything, so our estimate addresses both the damaged brick and the moisture behind it.
Keeping the area in front of the firebox clear
The U.S. Fire Administration advises a three-foot gap, at minimum, between fireplaces or other heat sources and anything that can burn. Rugs, furniture and stacked wood placed close to the opening are within reach of sparks and heat.
A firebox with open cracks or missing brick is one more reason to keep the front clear until the repair is done. When our technicians finish, they set the room back with that space in mind.
The color of new firebox joints
Refractory mortar often dries lighter than the old, soot-darkened joints around it. New joints stand out at first, especially next to a lining that has seen many fires.
They darken with use. If an even look matters right away, ask our technician about repointing a whole wall instead of a few joints, and we price both options so you can choose.
Glass doors and the edge of the firebox
Glass doors mount to the fireplace opening, and their frame often sits against the firebrick or the facing. Loose or crumbling brick at the edge of the opening can stop doors from sitting square.
Our technicians repair the brick at the opening so the edge is sound and true. Door replacement or adjustment is separate work, and we note on the estimate if the doors will need attention once the brick is repaired.
Keeping the firebox floor level
A firebox floor with sunken or raised bricks lets ash and embers collect in low spots and puts uneven weight on the grate. Over time the uneven bricks crack faster than the rest.
Our technicians relay uneven floor bricks on a sound bed so the floor sits level and tight. The grate then rests evenly, and cleaning the firebox becomes easier too.
Other work in Lockhart
-
-
-
-
-
Plain answers about firebox repair
Can a cracked firebrick be left alone?
A fine crack in a brick that stays tight and does not grow may only need watching. A crack that opens, runs through several bricks or comes with loose brick needs repair. Our technicians tell you which you have during the free inspection.
Do you repair fireboxes in Lockhart?
Yes. Our local, family-owned team repairs masonry fireboxes in Lockhart and the surrounding area, from single bricks to full relines. The inspection and written estimate are free.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.