Fireplace inserts fitted by local pros in Lorna Doone
From an open fireplace to a closed wood heater in Lorna Doone, planned around your firebox and your room.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The fit, the flue and the hearth, checked in Lorna Doone
An insert fits or it does not. These are the checks that decide it, written down before anything is ordered.
- Fireplace measured against the manual's minimum sizes
- Chimney height checked against the model's minimum
- Drop cloths from the door to the hearth
- Our workmanship warranty on the insert work we do
Wood insert installation, explained by our Lorna Doone team
Three parts of the job our insert specialists walk through with Lorna Doone homeowners.
Four measurements that decide whether a model fits
Insert manuals give the smallest fireplace a model can go into as a front width, a rear width, a height and a depth. The Pacific Insert guide lists all four for its model, plus a minimum chimney height. A unit that clears the front of the opening can still strike the back wall or the lintel.
Our installer measures at the face and at the back of the firebox, takes the depth at the floor and near the damper line, and sets each number against the model you prefer. If it will not fit, you hear that during the visit, well before anything is ordered.
Finding the fireplace flue in a larger chimney
A wide chimney can hold several flues side by side. One may serve the fireplace, another a furnace or water heater, and a third may have been abandoned when an appliance was replaced. From the roof they can look alike, and from the room only one is visible.
Before any liner is fed down, our crew traces which flue opens into the firebox and confirms nothing else is tied into it. The estimate names that flue, so the liner goes down the right opening the first time and every other appliance keeps its own exhaust path.
A flue that bends on its way up
Many masonry chimneys step sideways as they rise, to clear framing or to reach a better position on the roof. A rigid liner cannot follow a sharp change of direction, while a flexible stainless liner can be eased around it without being crushed.
We look at the offset from both ends and measure the full path, since a bend adds length. The liner we specify is one that can pass that route without kinking or flattening, and the estimate notes the offset so the order is right the first time.
The smoke shelf and the damper frame
Above the firebox of a masonry fireplace, the throat narrows at the damper, and behind it sits the smoke shelf with the smoke chamber rising above. A liner has to pass through this constricted area on its way to the collar.
Where the damper frame is too tight for the liner, the manual's exception may allow removing the damper plate or part of the frame, provided the structure stays sound and combustibles stay protected. We explain in advance exactly what, if anything, we plan to remove.
Other work in Lorna Doone
-
-
-
-
-
Learn more about wood-burning fireplace insert installationLorna Doone services
Fireplace insert questions, answered for Lorna Doone
Short answers from our insert installers in Lorna Doone. Anything else, just call.
What wood should I burn in my new insert?
Natural wood that has been split and seasoned, which EPA suggests testing with a moisture meter. Never burn trash, cardboard, painted or pressure-treated wood, and never use flammable liquids to start the fire.
How far should furniture stay from the insert?
One insert manual we work from says to keep combustibles 36 inches from the front of the unit. Your model's manual sets its own distance, and we point it out at the walkthrough.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.