Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney crown repair serving Merrimac

From a hairline crack to a crumbling top, our pros fix the crown so rain runs off the chimney instead of soaking in.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What your crown estimate covers in Merrimac

  1. Precast crown option where the chimney suits it
  2. Debris removal and roof cleanup
  3. Cure time before the next fire
  4. Signs of water reaching the flue or firebox

How a chimney crown gets fixed properly

What a chimney crown does on your roof

The crown is the concrete slab that caps the brick or block around the flue. It has one constant job, which is shedding rain off the top of the chimney before it soaks down into the masonry. When the crown cracks, that water goes straight into the wall and the flue instead of running off the edge.

Our technicians start every crown repair in Merrimac by checking how the top handles water today, where it runs, where it sits and where it gets in. That tells us whether sealing the surface is enough or the crown needs to be replaced, and you get the answer in a written estimate at no charge.

A crown that works well is easy to overlook, because nothing seems to happen. Rain lands, runs to the edge and drips clear of the brick. Once that stops, the first signs usually show up far from the roof, as rust in the firebox or damp patches beside the fireplace.

Casting a new crown on the chimney

A cast-in-place crown is built right on top of your chimney. Our crew removes the failed top, builds forms around the chimney, sets reinforcement and places the concrete with a slope running away from the flue. The forms create the overhang and the drip on the underside of the edge.

In section R1003.9.1, the Florida Building Code, Residential, calls for a masonry chimney cap made of concrete, metal or stone, pitched to throw off water, with a drip edge and a caulked bond break at every flue liner. We build to that description and walk you through each detail when the forms come off.

A cast crown also lets us correct what the old one got wrong. If the flue tile was buried, the new crown sits lower around it. If water ran down the face, the new overhang and drip send it clear. Tell us what bothered you about the old crown and we build the answer into the new one.

Crowns on concrete block chimneys

Many chimneys are built of concrete block, sometimes hidden under stucco or paint. Block has hollow cores, and a cracked crown lets rain drop straight into them. The water then travels down inside the wall where nobody can see it.

When we rebuild a crown on a block chimney, the top has to be solid enough to carry it. Our crew checks the top course and fills or caps the cores as needed before casting. The written estimate explains that extra prep before you agree to it.

Block chimneys usually carry a finish coat, and water in the cores shows up as cracks or stains in that finish. Once the crown is sound and the cores are capped, the finish can dry out, and any repair to it holds up much better.

Form work and a clean crown finish

The shape of a new crown comes from its forms. Good forms give a straight overhang, a true drip line and a crisp edge. Rushed forms give a lumpy top that holds water in its low spots for days.

Our crew takes the time to build and square the forms before any concrete arrives. After the pour, the surface is finished smooth so water runs off. When the forms come off, you get a crown that looks right from the yard and works right on the roof.

The finish also changes how water behaves. A smooth, dense surface sheds rain better than a rough one, and a sharp edge at the drip lets it fall clear. Our crew finishes each crown by hand and checks the slope before leaving it to cure.

What homeowners ask about crown work

Can a cracked crown be sealed instead of replaced?

Often, yes, when the cracks are fine and the concrete around them is still sound. A coating made for chimney crowns bridges small cracks once they are cleaned and filled. If the crown is hollow, broken at the edges or has no slope, sealing only delays the next leak, so we recommend a new crown instead.

Do you offer a discount on chimney crown repair?

Crown repair booked within 72 hours after your free inspection is 10% off. Mention the offer when you book and we note it on your written estimate.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376