Chimney flashing replaced and resealed in Ocoee
Chimney flashing experts covering Ocoee for shingle, tile and metal roofs, with a free inspection and an honest answer.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What your chimney flashing estimate in Ocoee covers
These items keep a flashing job in Ocoee from turning into a second trip to the roof.
- Flashing metal and thickness proposed
- Mortar condition where counter flashing anchors
- Valleys and downspouts draining toward the chimney
- Findings that need a separate decision
Flashing repair explained for Ocoee homeowners
Straight answers about flashing work in Ocoee, from the people who do it.
Where the chimney sits on the roof changes the flashing
A chimney that comes through at the ridge has little water above it. One in the middle of a slope faces the full flow from above. One at the eave may meet a wall, a gutter or a soffit instead of open roofing.
Each location calls for a different flashing layout. We look at where your chimney emerges and how much roof drains toward it before recommending the pieces. The back of a mid-slope chimney usually needs the most attention.
Folded or soldered corners
Corners can be closed by folding the metal into a tab that wraps around, or by soldering a seam on metals that accept solder, such as copper. Each method has its place, and each needs care to avoid a gap at the fold or the seam.
We explain which approach suits your flashing metal and chimney shape. Folded corners are common on aluminum and coated steel, while soldered corners are common on copper. Either way, each corner is sealed and checked before the roofing goes back over it.
Checking the flashing after a strong storm
High winds can lift loose counter flashing, tear old sealant and drive debris into the uphill side of the chimney. A leak that starts right after a storm often traces to a piece that was already weak.
From the ground, look for metal standing away from the masonry, missing pieces or bent edges. If you see any, call for a free inspection before the next heavy rain, and leave the ladder in the garage. Roof checks are our job.
One local team from inspection to cleanup
Our family-owned team does the inspection, writes the estimate and carries out the work. The person who explains the repair to you is part of the crew that stands behind it afterward. You deal with the same people from the first call to the final walkthrough.
If something about the finished flashing is not right, call us. Our 100% satisfaction guarantee means we come back and make it right, and our workmanship warranty covers the flashing we install.
Other work in Ocoee
-
-
-
-
-
Before your flashing job in Ocoee
If your question is not here, our Ocoee team is a phone call away.
Will another coat of caulk stop my flashing leak?
Rarely for long. Sealant belongs inside a proper flashing detail, but spread over an open gap it hardens and pulls away from the masonry. We repair the metal and the joint that holds it.
Can you work around my solar panels?
Often, yes. We check the clearance around the chimney during the inspection. If panels need to be moved for access, we tell you up front so the solar installer can be scheduled.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.