Fireplace inserts fitted by local pros in Palomar
Ask about a same-day visit in Palomar. Our crew explains the liner, the surround and the hearth in plain words.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What the insert plan for your Palomar home includes
Checked once, carefully, so install day in Palomar runs without a second visit.
- Fireplace measured against the manual's minimum sizes
- Old damper locked open or removed
- Clearances to mantel, side trim and top facing measured
- Manual, model, serial number and liner details left with you
The flue, the fit and the fire, for Palomar inserts
What our installers look for, and why it matters, on Palomar insert jobs.
Closing the top of the flue around the liner
At the chimney top, the liner passes through a stainless plate trimmed to sit on the flue tile. The Pacific guide describes an overlap of about an inch to an inch and a half on each side, the plate screwed to the liner, the gap sealed with RTV silicone and a rain cap fitted to the liner end.
That closure keeps rain, leaves and animals out of the space between the liner and the old flue. Because it is roof work, the estimate states how the crew will reach the chimney top and how the roof covering is protected while they work up there.
Fireplace repairs finish before the insert goes in
Insert manuals ask for the fireplace to be examined for cracks, loose mortar and other defects, and for any repairs to be completed before installation. Travis Industries puts it simply: the entire fireplace, including the chimney, must be clean and undamaged. Once the insert and surround are in, the firebox behind them is hard to reach.
If our inspection turns up damage, the repair is written as its own item with its own scope, separate from the insert work. You decide on both with the facts in front of you, and nothing is closed up behind a surround to make the job look finished.
The surround panel and what it does
The surround is the steel panel framing the insert face. It closes the gap between the unit and the edges of the fireplace opening, and in some installations it forms the seal the manual requires. It looks like trim, but it has a job.
Makers offer surrounds in set sizes, and a panel that is too small leaves the rough opening showing at the edges. We measure the full face of your fireplace, including uneven brick or stone, and the estimate names the surround size we plan to order.
How install day usually runs
A typical sequence is protection laid, old parts removed, firebox cleaned, liner lowered from the top and connected, insert slid in and leveled, surround fitted and sealed, top plate and cap finished, and a first fire lit together.
The order can change with the fireplace, and we explain the plan for yours at the inspection. You know when the crew needs the roof, when the living room is out of use and when you can light the first real fire.
Other work in Palomar
-
-
-
-
-
Learn more about wood-burning fireplace insert installationPalomar services
Fireplace insert questions, answered for Palomar
Undecided? These help, and the insert visit in Palomar costs nothing.
Can you remove my old insert?
Yes. We take out the old unit and its surround, disconnect its pipe and any wiring, and haul it away when that is part of the scope. Then we look at the firebox and flue it was covering.
How should I get rid of the ashes?
Scoop them into a metal container with a tight-fitting lid, and leave it on a noncombustible surface, clear of anything that burns, until the ashes are cold. Insert manuals give the same instruction.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.