Gas insert installation planned around your Park Lake/Highland fireplace
Call our family team in Park Lake/Highland for a free inspection, then take 10% off gas insert work you book within 72 hours after it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Measured at your Park Lake/Highland fireplace, priced in writing
Checked in person by our family-owned team in Park Lake/Highland and explained without jargon.
- Exhaust and intake liners from the insert collars to the chimney top
- Shutoff valve location and service slack in the gas line
- Hearth and floor covering in front of the insert
- Barrier screen front ordered with the insert
The engineering behind a gas insert in Park Lake/Highland
The practical side of the job, as our Park Lake/Highland specialists explain it on site.
Keeping insulation off the vent
The vent carries hot exhaust, and the manual is firm about the space around it. Heat & Glo warns installers not to pack the air space around the vent with insulation or other materials, because that can lead to overheating and fire.
At the damper, we use only the non-combustible material the manual allows, in the way it allows it. Everywhere else, the liners run through the open chimney with the clearance their instructions give them.
How every fitting is leak checked
Each fitting on the supply is checked before the insert is used. The installation manual names the methods: a listed combustible gas detector, a noncorrosive leak detection fluid or another approved method. It adds a warning that should never need repeating: no open flame.
The check happens while the connection is still exposed, before the surround and trim close off access. Any fitting that shows a problem is remade and checked again, so the connections were proven where they can still be reached.
Wired and grounded to the electrical code
The insert's electrical side follows the electrical code. Heat & Glo says the appliance must be electrically wired and grounded in accordance with local codes or, where there are none, the National Electrical Code, NFPA 70.
Our crew handles the fireplace work. Any new circuit, outlet or change to your house wiring is done by an electrician and listed separately, so the estimate shows exactly who does what. Before startup, we confirm the insert is connected to the supply its manual calls for.
Keeping the space in front clear
A gas insert throws its heat forward. The Supreme owner's manual shows a clear space of three feet in front of the fireplace and warns against placing combustible objects there or blocking the louvers. It also advises keeping candles and other heat-sensitive objects off the mantel and hearth.
Furniture layout is part of the plan. We point out the clear space at the walkthrough, so a favorite chair or a rug does not creep too close over the cooler months.
Other work in Park Lake/Highland
-
-
-
-
- Fireplace RestorationBring an unused fireplace back with a coordinated plan.
- Ventless Gas Fireplace ServiceService the unit within its exact installation limits.
Learn more about gas fireplace insert installationPark Lake/Highland services
Gas insert questions we hear in Park Lake/Highland
Short, straight answers from our fireplace team in Park Lake/Highland. Anything else, just call.
Do I need a new liner for a gas insert?
Yes. A direct-vent insert uses its own liners, one for exhaust and one for combustion air, running from the insert to a cap at the chimney top. They come from the vent system named in its manual.
Can I put a TV above my gas insert?
Often, if the mantel and the distances in the maker's guidance work and the TV's temperature limit allows it. We check the insert's clearance table and the TV's specifications before the bracket goes up.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.