Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Local gas fireplace installers serving Park Lake/Highland

Family-owned gas fireplace installation for Park Lake/Highland homes, backed by a 100% satisfaction guarantee.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Your gas fireplace plan for Park Lake/Highland, on paper

No brochure can answer these. We check them at your Park Lake/Highland home and write them down with upfront pricing.

  1. Termination cap location against the clearance table
  2. Shutoff valve and flexible connector at the unit
  3. Logs placed to the diagram and glass sealed
  4. Controls, manuals and model details handed over

Installing a gas fireplace in Park Lake/Highland, explained

Worth a read before you approve a gas fireplace project in Park Lake/Highland.

Inspecting the unit before it goes in

Glass and small parts can be damaged in transit. The manual asks installers to report any shipping damage to the dealer, particularly to the glass, and says installing a damaged appliance or vent component voids the warranty.

Our crew inspects the fireplace, the glass and the vent parts on arrival. A damaged piece is replaced before installation instead of being noticed after the wall is finished. Your fireplace goes into the wall in the condition it left the factory.

Framing the hole through the wall

Where the vent passes through an outside wall, the opening is framed to the size the manual gives. The Novus manual says a hole through a combustible wall must be framed with a wall shield firestop, which keeps the clearances and limits cold air infiltration, and its heat shields must overlap by at least an inch and a half.

We cut and frame the opening from inside and out, fit the shield and the termination cap and seal the cap to the siding or stucco. The outside finish is left weather-tight and neat.

Cap clearances after future projects

A vent cap placed correctly today can end up too close to something built next year. Owner's manuals ask homeowners to check the cap's clearance to later construction such as additions, decks, fences and sheds.

If a pergola, fence or screen enclosure is planned near the fireplace wall, tell us at the inspection. We place the cap with your plans in mind, so a later project does not force a vent change.

Gas fireplace installation questions in Park Lake/Highland

Weighing up a new fireplace? Start here, then book the free visit in Park Lake/Highland.

Can I put a TV above the new fireplace?

Often, with the right mantel and distances. We check the fireplace maker's guidance and the TV's own temperature limit and plan the wall before anything is built.

What is the difference between a gas insert and a gas fireplace?

An insert fits inside an existing fireplace and vents through its chimney. A gas fireplace is a complete unit with its own firebox and vent, installed where you choose. We help you decide which suits your home.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376