Chimney damper replacement serving Pershing
Get control of your fireplace back. Our damper pros repair handles, linkage and plates, or replace a damper that is worn out.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What your damper estimate covers in Pershing
- Handle, rod and linkage check
- Rain cap check to stop future rust
- Floor and hearth protection during the work
- 100% satisfaction guarantee on the finished job
Damper facts for Pershing homeowners
Rotary damper controls on the fireplace face
A rotary control uses a small crank or knob on the face of the fireplace. Turning it drives a gear and rod that swing the damper plate open or closed. It is tidy and convenient until a gear strips or the rod works loose.
If the knob spins freely or turns with no effect, the drive between the knob and the plate has usually failed. Our technicians trace the rod, check the gear housing and tell you whether a part can be replaced or the damper needs to be.
Rotary drives are also sensitive to soot and rust in the gear housing. Cleaning the drive can sometimes restore it, while a stripped gear needs a new part. We check the whole path from knob to plate before recommending anything.
A top-sealing damper as an alternative
When a throat damper cannot be repaired, or the throat is too damaged to hold a new one, a top-sealing damper is another option. It mounts at the top of the flue and opens and closes with a cable that runs down to the fireplace.
It is a separate service with its own fit questions, the flue size, the condition of the top of the chimney and how you use the fireplace. Our technicians explain both options side by side so you can choose.
A top-sealing damper also changes your routine a little. The cable handle sits inside the fireplace, and the damper has to be opened before every fire. Our technicians show you how it works so the change is easy to live with.
A written damper estimate before any work
Every damper job starts with a free inspection and a written estimate. It lists what we found, what we recommend and what each part and step costs.
The estimate keeps damper work separate from any firebox, smoke chamber, sweep or cap work, so you can compare it with other proposals item by item. You keep it whether you book with us or not.
Estimates also name the parts we plan to use. For factory-built fireplaces we list the part or model reference, so you can see the replacement matches your unit.
Planning an insert, and what it means for the damper
A fireplace insert changes how the fireplace vents, and the insert's own installation instructions decide what happens to the old damper. Repairing the damper right before an insert goes in may be wasted money.
If an insert is in your plans, tell us at the inspection. Our technicians explain how the two jobs relate and help you avoid paying for work the insert will make unnecessary.
If the insert is still a future plan, a simple damper repair may still be worth doing for now. Our technicians explain how long the repair is likely to serve before the insert goes in, so the money is well spent.
Other work in Pershing
-
-
-
-
-
Learn more about chimney damper repair and replacementPershing services
What homeowners ask about dampers
What does the building code expect from a fireplace damper?
For a masonry fireplace, section R1001.7.1 of the Florida Building Code, Residential, wants a damper of ferrous metal, placed 8 inches or more above the top of the opening, in the fireplace or its chimney, with a control you can work from the room. Replacement dampers go in with those points in mind.
Do glass doors do the damper's job?
No. Doors help keep room air from being drawn into the fireplace, but only the damper closes the flue. We check that the damper control is still easy to reach with the doors on, and where the doors block the handle we can often adjust it.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.