Family-owned chimney chase repair in Rock Springs Ridge
Rebuild or repair, our family team prices both for Rock Springs Ridge homes and backs the work with a 100% satisfaction guarantee.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Line items on a chimney chase estimate
- Water-resistive barrier lapped upper over lower
- Top plate and framing under the cover
- Cricket behind a wide chase where needed
- Trim primed, installed and sealed at joints
Our approach to chase repair in Rock Springs Ridge
What a chimney chase is built to do
A chimney chase is a framed box that wraps the factory-built chimney pipe on its way up and out of the house. It is built from studs and sheathing like any exterior wall, then finished with siding or stucco to match the home. From the yard it can pass for a masonry chimney, but no brick holds it up.
The chase has two jobs. It keeps weather off the metal chimney inside, and its framing is laid out to stay the distance from the pipe that the chimney maker lists. When water gets into the box, the wood can rot for a long time behind a finish that still looks fine.
Our technicians treat chimney chase repair in Rock Springs Ridge as exterior wall work with a listed chimney in the middle of it. The written estimate names the wood, the finish and the water path separately, so you can see what each line fixes.
A cricket behind a wide chase
A wide chase acts like a dam on the uphill side of the roof. Rain and leaves pile up against it, and water sits at the joint instead of running past. A cricket, also called a saddle, is a small peaked roof built behind the chase that splits the water around both sides.
Florida's residential code, in R903.2.2, wants a cricket or saddle on the uphill side of a chimney or roof penetration wider than thirty inches, measured across the slope at a right angle. The covering is sheet metal or the same material as the roof.
When we rebuild the back wall of a wide chase on your Rock Springs Ridge home, we check whether a cricket is there and whether it drains. A missing or failing one goes on the estimate as its own item, with any roofing tie-in noted.
Wood or gas, the chase shell is the same job
A chase can enclose the chimney for a wood-burning fireplace or the vent pipe for a gas unit. The pipe inside can be a different listed product in each case, with its own instructions, but the shell around it is the same framed wall with the same water problems.
What changes is what we check inside. The clearances, supports and top details come from the listed product in your chase, not from a general rule that fits every fireplace. A chase around a gas vent can still rot at the base, split at the siding joints and leak at the top, just like one around a wood-burning chimney.
Our crew identifies the product before planning the repair and keeps its instructions in front of us. The siding, sheathing and framing repair is priced the same way for either fuel. If the fireplace itself needs service, that is a separate visit on a separate estimate.
A fireplace you never use still has a chase
In some houses the fireplace has sat unlit for years. The chase around its chimney still takes the same rain and sun as the rest of the house, and it can rot just as badly when nobody is watching it.
An unused fireplace can hide a chase leak for a long time, because nobody sees the rust or damp ash in the firebox. The first sign may be a ceiling stain or soft siding.
Our technicians inspect the chase whether or not you burn fires. If you plan never to use the fireplace, we can talk through the upkeep the chase still needs and the options the chimney maker allows at the top. For Rock Springs Ridge homeowners, we treat the chase as a wall that has to stay dry.
Other work in Rock Springs Ridge
-
-
-
-
-
Learn more about chimney chase repairRock Springs Ridge services
Quick answers on chimney chase repair
Can a chase be changed from siding to stucco?
Yes, as long as the framing is sound and flat. Stucco over wood needs a two-layer barrier, corrosion-resistant lath and three coats, so we price it as its own option next to a like-for-like siding repair.
What happens to the chimney pipe while you work on the chase?
The pipe stays in place and is protected while the framing around it is replaced. Our crew keeps the listed air space clear and puts firestops, shields and supports back where the chimney maker's instructions call for them.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.