Honest chimney repair for Roosevelt Park homeowners
Same-day visits when the schedule allows, and nothing starts until you approve the written estimate.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The chimney parts we price for Roosevelt Park homes
- Crown condition, slope and drip edge
- Rain cap, spark screen and fasteners
- Cricket on the uphill side of a wide chimney
- Stucco or stone finish and the backing behind it
The work behind a sound, dry chimney
Rust streaks running down the chimney
Orange or brown streaks down a chimney come from steel above them. They start under a rusting cap, a spark screen, a metal chase top or another steel part at the top, and they grow each time rain runs over the metal.
Rust on a part at the top of a chimney means that part is not standing up to the water it sees. BIA guidance says a metal rain cap should be corrosion resistant, and flashing is expected to be corrosion-resistant sheet metal for the same reason. A part that rusts through lets water in as well as staining the brick.
The fix starts at the source. Each streak is traced up to the part that made it, that part is replaced with corrosion-resistant metal and the stain is treated as a cleaning item for after the repair. On homes in Roosevelt Park, the estimate names the rusting part first and the stain second.
Why caulk at the roofline keeps failing
A line of roofing cement or caulk along the base of a chimney often marks a leak someone has already tried to stop. It may slow water for a while, but it does not take the place of the flashing that belongs at that joint.
The difference is in how each one handles water. Flashing works by overlapping, each piece lapping over the one below so water runs off it. A bead of caulk works only while it stays stuck to both surfaces, and it has no lap to fall back on. Once the bond breaks, water gets in behind the bead.
Where layers of old caulk cover the roofline, enough of it comes off to show what is underneath. Missing or failed flashing then goes on the estimate as flashing work, and chimneys in Roosevelt Park do not simply get another bead on top of the old ones.
Antennas, dishes and lights mounted on a chimney
A chimney looks like a handy post for a satellite dish, an old antenna, a flag bracket or a string of lights. The Florida Building Code lets a chimney carry nothing but its own weight unless it was designed and built for the added load. A chimney built to carry itself has no allowance for a mast pulling on it.
The damage tends to start at the anchors. Bolts and straps drilled into brick or mortar open holes for water, and a mast that moves works those holes larger. Straps wrapped around the stack can crack corners and hold water against the face.
The repair is taking the mount down, patching or replacing the drilled masonry and putting the equipment somewhere built to hold it. Our technicians remove what is on the chimney and the estimate prices the masonry repair. Mounting the dish somewhere else is a job for its installer.
Carbon monoxide alarms and a fuel-burning fireplace
CDC advice is to install battery-operated or battery back-up carbon monoxide detectors near every sleeping area in the home. NFPA heating safety tips say to install and maintain CO alarms, and they add that all fuel-burning equipment should be vented to the outside to avoid CO poisoning. A home with a fireplace or any other fuel-burning appliance needs them.
An alarm that goes off is not a chimney question. Get everyone out of the house and call 911 from outside. The cause gets tracked down only after the fire department has cleared the home.
Where a chimney comes in is venting. CDC guidance notes that chimneys can be blocked by debris, which can cause carbon monoxide to build up inside a home, and a cracked liner or a damper stuck closed can also keep combustion gases from leaving the way they should. Our technicians check those parts during the free inspection, and any fault that affects venting goes to the top of the estimate, ahead of cosmetic work.
Other work in Roosevelt Park
-
-
-
-
-
Before you schedule chimney repair in Roosevelt Park
What parts of the chimney does your repair service cover?
All of it, from the cap and crown down through the flashing, brick, mortar, flue lining, smoke chamber and damper, plus framed chases and factory-built chimneys. Each damaged part gets its own line on the written estimate. When a part has its own specialist service with us, such as liner installation, the estimate says so.
Is the inspection really free, with no obligation?
Yes. You pay nothing for the inspection or the written estimate, and going ahead is entirely your call. If you do approve the work within 72 hours after the inspection, 10% comes off.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.