Gas log installation sized to your Sand Lake Hills fireplace
Enjoy a real-looking fire at the turn of a knob. Call our local gas log pros in Sand Lake Hills for a free inspection and an honest plan.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Inside your gas log quote in Sand Lake Hills
Recorded by our family-owned team in Sand Lake Hills and explained in everyday words before you choose a set.
- Flue, damper and firebox cleaned and checked first
- Gas type on the rating plate against your supply
- Flame appearance checked against the manual
- Manual, rating plate and tags left in place
How we handle gas log installation in Sand Lake Hills
Notes from our gas log installers working in Sand Lake Hills.
How the set lights and what stops the gas
Florida's fuel gas code, in section 602.2, wants the main burner of a decorative set lit by direct ignition, by an igniter or by a pilot, backed by a flame safeguard. Sets listed to ANSI Z21.84, the standard for manually lighted sets, are the exception.
The flame safeguard is what stops gas to the burner when the ignition fails. Our technicians check that it works on every set we install or service, and they do not install a burner that lacks one unless its listing allows it.
Cleaning the fireplace before the burner goes in
Years of wood fires leave material behind that a gas burner should not sit under. Before its set goes in, one log set maker wants the flue, the damper and the firebox scrubbed free of soot, ash and flaking paint and looked over by a qualified professional.
Our crew does that cleaning and inspection as the first stage of the job, so the damper will clamp, the flue is open and nothing falls onto the new burner the first time it warms up.
Never left burning unattended
A gas log fire is still a fire. One vented log set manual says adults shall be present when the appliance is operating and that it shall not be left burning when unattended or while anyone is sleeping.
It is an easy rule to forget when the flame is only a switch away. Our technicians go over it at every handover, along with where the shutoff is and how long the logs stay hot after the burner is off.
A pilot that will not light at all
A pilot that clicks without lighting has its own short list in one maker's troubleshooting table, from low gas pressure and a closed shutoff valve to a loose igniter wire, a blocked pilot hood, air in the line or dead batteries.
Some of these take a minute to fix and some need a part. Our technicians find which one it is and tell you before any part is ordered, with upfront pricing.
Gas logs in a manufactured home
One vented log set manual allows installation in an aftermarket, permanently located manufactured home where local codes do not prohibit it, and it names the federal and national standards those installations must meet.
Not every set carries that allowance, and not every fireplace in a manufactured home is built for gas logs. Our pros check the set's listing and the fireplace's own label before recommending anything.
Other work in Sand Lake Hills
-
-
-
-
-
Learn more about gas log installationSand Lake Hills services
What people in Sand Lake Hills ask about gas logs
Our gas log team in Sand Lake Hills answers the usual questions here. Call about anything else.
Why does the damper have to stay open with gas logs?
The exhaust from a vented set rises up the chimney, which means the flue has to stay open. One maker ships a clamp that is fixed to the damper for good and wants the damper fully open any time the set is lit. Vent-free sets have their own rules in their own manuals.
How big a log set will fit my fireplace in Sand Lake Hills?
It depends on the firebox. We measure the front width, the rear width, the depth and the height, and compare them with the set's table. One maker's smallest burner needs a firebox 26 inches wide at the front and 15 inches deep.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.