Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Family-owned wood insert installation in South Apopka

Ask about a same-day visit in South Apopka. Our crew explains the liner, the surround and the hearth in plain words.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Before any insert is ordered for your South Apopka home

The firebox, the flue and the hearth are measured in person in South Apopka, and each result lands on your estimate.

  1. Flue identified, checked and swept if needed
  2. Old damper locked open or removed
  3. Clearances to mantel, side trim and top facing measured
  4. Drop cloths from the door to the hearth

A wood insert job in South Apopka, start to finish

Each point below turns into a line on your written estimate in South Apopka.

Power for the insert blower

Many inserts carry a circulating blower that pushes heat into the room. The Pacific Insert blower runs on standard household current, and its guide asks for a properly grounded outlet that takes a three-prong plug, with the grounding prong never cut or removed, and wiring to the National Electrical Code.

When no outlet sits within reach of the cord, an electrician adds one as separate work with its own line on the estimate. We plan the cord route so it stays away from hot surfaces and out of sight behind the surround where the manual allows.

Clean-out access and local code

Pacific's guide notes, for both its positive and direct connection methods, that a clean-out door may be required under local codes. The door gives access to the space above the block-off plate, where debris from the old flue can settle.

When local code or good practice calls for one, it goes on the estimate with its location. When it does not, we explain how that space is reached during later sweeping, so the arrangement is serviceable for as long as the insert stays in.

A rain cap on the end of the liner

The last step of a full-liner installation in the Pacific guide is a rain cap attached to the liner end, with a storm collar allowed as well. Without a cap, rain falls straight down the liner and into the insert, where it rusts steel and softens firebrick.

We fit a cap made for your liner and check that it sits clear of any existing cap on the chimney. When the old cap is in the way, the change is written into the scope so you know exactly what the chimney top will look like afterwards.

Raised hearths and flush hearths

A raised hearth stands above the surrounding floor, while a flush hearth sits level with it. The Pacific guide treats the two differently: a hearth raised above a combustible floor meets its requirement at one depth, and a flush hearth has to reach further out in front of the opening.

We measure the height and depth of your hearth and read the manual for your model before deciding whether it passes. The result, and any extension it needs, goes into the estimate in plain words.

Wood insert questions we answer in South Apopka

Honest answers from our South Apopka insert specialists, no pressure attached.

What happens to the old damper?

Insert manuals direct that it be locked fully open or removed. We secure or remove it during the installation, so it cannot be closed on the exhaust path later.

Will my hearth be big enough?

Insert manuals set how far the noncombustible hearth must reach in front of and beside the opening, and whether a flush hearth needs to reach further. We measure yours and write any extension into the estimate.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376