Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Gas insert installation planned around your South Apopka fireplace

From an empty firebox to a working gas insert in South Apopka, planned step by step and backed by our workmanship warranty.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Measured at your South Apopka fireplace, priced in writing

What our South Apopka crew confirms first, so the insert you pick is one that will fit, vent and connect.

  1. Masonry or factory-built fireplace, and what the insert manual allows
  2. Outlet inside the firebox or a cord route to a nearby outlet
  3. Mantel and side wall clearances checked against the manual's tables
  4. Hearth and floor covering in front of the insert

The engineering behind a gas insert in South Apopka

Field notes from our gas insert installers serving South Apopka.

Why the chimney is examined before hookup

Florida's Fuel Gas Code has a rule for exactly this job. Section 503.5.6 says that before an appliance is connected to a chimney, the passageway must be examined to confirm it is clear and free of obstructions, and cleaned if it previously vented a fireplace or another solid- or liquid-fuel appliance.

A chimney that carried wood smoke for years will almost always need that cleaning. We do it as part of the preparation, or list it on the estimate when it is a bigger job, before the insert's liners go down. A new gas appliance never gets connected to a passage that has not been cleaned and checked.

How every fitting is leak checked

Each fitting on the supply is checked before the insert is used. The installation manual names the methods: a listed combustible gas detector, a noncorrosive leak detection fluid or another approved method. It adds a warning that should never need repeating: no open flame.

The check happens while the connection is still exposed, before the surround and trim close off access. Any fitting that shows a problem is remade and checked again, so the connections were proven where they can still be reached.

What counts as noncombustible

Insert manuals use the words combustible and noncombustible precisely. The Supreme manual defines noncombustible materials as those made entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or materials reported as passing ASTM E 136. Wood, compressed paper, plant fibers and plastics count as combustible, even when flame-proofed.

That matters when you choose a new face for the fireplace. Tile over a noncombustible backer may qualify where a painted wood panel would not. We check your finish choices against those definitions before anyone starts cutting.

Young children and a hot insert

Owner's manuals are direct about children. The Supreme owner's manual says to keep children away, supervise them in the same room as the appliance and consider an adjustable safety gate to keep toddlers and young children back from the fireplace.

The barrier screen protects against touching the glass, but the surround and front still get hot. We talk through the room layout with families and point out the parts that stay warm after the fire is off.

Quick gas insert answers for South Apopka

Still weighing it up? Read these, then book the free visit in South Apopka.

Will you fit an insert I already purchased?

Gladly, as long as it suits your fireplace. Give us the model number when you call, and the installer reviews its opening and vent requirements before arriving. If it cannot fit, you find out while there is still time to return it.

Can an insert go into a factory-built fireplace?

Often, when the insert's manual allows it. Heat & Glo, for example, designs its Supreme inserts for masonry fireplaces and for factory-built fireplaces listed to UL 127. We confirm your fireplace's type and listing at the inspection.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376