Gas log installation by local pros in Thornton Park

A level, smooth floor under the burner

A burner pan works as designed only when it sits flat. One log set manual requires the fireplace floor to be level and smooth and the pan to rest level on it, and it treats a clean floor as part of the installation.

Uneven hearth brick or a firebox floor with broken pieces can tip a pan enough to change how the burner lights and how the flames spread. Our installers check the floor first and include any leveling repair in the written scope.

Why a log set smokes or soots

Smoke and soot from a gas log set have a known list of causes. One maker's troubleshooting table covers the chimney, the damper, the burner position, the media, the air openings and the logs themselves.

Our pros work through that list in order at your home, because the fix for a closed damper is nothing like the fix for a propane burner running on natural gas.

• Poor draft, downdraft or a closed damper
• Burner too close to the front of the firebox
• Media placed wrong or packed too tight
• Air mixer closed or air shutters blocked
• Logs out of position
• Burner built for the other gas
• Accessories that do not belong to the set

Connecting and testing before the batteries go in

Order matters at installation. One maker says the set must be connected to the gas line and tested for leaks before batteries are inserted in its receiver, and that the burner must be off and cool before any battery change.

Our installers follow that sequence, connect and leak test first, then power the controls and sync the remote where the set has one. It keeps a stray spark away from an untested connection.

What the written gas log estimate lists

Our estimate names the log set by maker and model, the burner size, the damper clamp or stop, the media and embers and the controls. Repairs, removal of the old set and any gas piping by others each get their own line.

What you approve is what you pay, unless you agree to extra work. No fees hide in the fine print, and when you book within 72 hours after the inspection, 10% off is printed on it.

• Log set, burner and controls
• Damper clamp or permanent stop
• Repairs the fireplace needs first
• Gas piping by others, if any

Gas logs and a home inspection

Home inspection reports often note a gas log set that did not light, a missing damper clamp or soot on the logs. Those notes deserve a clear, written answer.

Our specialists check each item against the set's manual and the Florida fuel gas code, repair what needs repair and give you a document that buyer and seller can both rely on, with upfront pricing for any work.