
Chimney crown repair for Tildenville homes
Stop rain at the top of your chimney. Our crown specialists repair, coat or rebuild the crown and leave your roof clean.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What your crown estimate covers in Tildenville
- Height of each flue tile above the crown
- Crack filling before any coating goes on
- Removal of failed coatings, tar or caulk
- Water staining on the chimney face below
Crown repair details that keep water out
Peeling coatings from an earlier repair
If an earlier coating is peeling, bubbling or flaking, water has already gotten underneath it. Brushing another coat over the top traps that water and eventually peels off along with the old layer.
We remove loose coating down to sound material and check the concrete underneath before recommending anything. Sometimes the crown under an old coating is fine and only needs a proper recoat. Sometimes the coating was hiding a crown that needs replacing, and we tell you which.
Knowing what the earlier coating was helps a lot. If you have a receipt or a can label from the last repair, keep it for the inspection. Some products need a specific cleaner or primer before a new coat will stick, and the label saves guesswork.
Crowns on concrete block chimneys
Many chimneys are built of concrete block, sometimes hidden under stucco or paint. Block has hollow cores, and a cracked crown lets rain drop straight into them. The water then travels down inside the wall where nobody can see it.
When we rebuild a crown on a block chimney, the top has to be solid enough to carry it. Our crew checks the top course and fills or caps the cores as needed before casting. The written estimate explains that extra prep before you agree to it.
Block chimneys usually carry a finish coat, and water in the cores shows up as cracks or stains in that finish. Once the crown is sound and the cores are capped, the finish can dry out, and any repair to it holds up much better.
Crowns that have settled into a dip
A crown that has settled into a shallow bowl holds water after rain. You may see a ring of dark staining where puddles sit and dry, often right around the flue.
Coatings do not fix a dipped crown for long because the water keeps sitting on the surface. We usually recommend recasting it with a proper slope, and the inspection shows how much water the crown is actually holding.
A dip can also come from a crown that was poured unevenly from the start. Either way, water sits where it should run. When we recast the crown, the slope is checked across the whole surface before the concrete sets.
Repair materials made for chimney crowns
Crown repairs call for materials made to bond to old concrete and stand up to weather on a chimney top. Ordinary bagged mortar often shrinks and cracks when it is spread thin over an old crown.
Our crew uses products suited to the repair, prepared the way the maker specifies. The estimate names the material, so you can look it up yourself or ask us anything about it.
Material choice also depends on the size of the repair. Thin repairs need products made to grip in thin layers, while larger sections need a mix that can be formed and cured like new concrete. Our crew matches the material to the repair, and the estimate says which one.
Other work in Tildenville
-
Gas Fireplace Repair and Service Get a clear answer when your gas fireplace will not cooperate. Learn more
-
Gas Fireplace Insert Installation Give the insert a compatible fireplace and vent route. Learn more
-
Chimney Repair A sound chimney starts with the right repair. Learn more
-
Chimney Damper Repair and Replacement Restore a damper you can operate with confidence. Learn more
-
Gas Log Installation Match the log set to the fireplace and its intended use. Learn more
Quick answers on chimney crown repair
Is the crown the same thing as the chimney cap?
No. The crown is the concrete slab poured over the masonry at the top, around the flue, while the cap is the screened metal cover that shields the flue opening itself. Many chimneys need work on only one of them. Your written estimate lists each part separately.
Is crown repair covered by a warranty?
Crown work falls under our workmanship warranty, with our 100% satisfaction guarantee alongside it. The warranty terms for your job are written on the estimate, so you know what is covered before you approve the work.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.

