Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Stone chimney repair in Wedgefield

Joints that match your stone in color and texture, repointed in Wedgefield by a family-owned team that stands behind its work.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Stone and joint checks on your Wedgefield chimney

What our stone specialists in Wedgefield record before any quote goes out.

  1. Joint depth and mortar condition checked
  2. Joints tooled to match the existing profile
  3. Curing protection for fresh mortar
  4. Cleaning timed after the mortar hardens

Getting a stone chimney repair right in Wedgefield

Code sections, the maker's directions and mortar basics for stone chimneys in Wedgefield.

A stone chimney is a masonry chimney

The Florida Building Code, Residential, section R1003.1, defines a masonry chimney as one built of solid masonry units, hollow masonry units grouted solid, stone or concrete. A solid stone chimney falls under the same masonry chimney rules as a brick one.

Section R1003.10 puts the floor for masonry chimney walls at 4 inches nominal. Solid stone chimneys are repaired as structure, so loose or missing units are more than a cosmetic matter, and we treat them that way in the findings.

Roof flashing on a stone chimney

The line where a stone chimney meets the roof needs flashing built for it. The manufactured stone instructions we follow note that chimney or chase construction should incorporate proper flashing, and irregular natural stone makes the detail harder to get right.

Failed flashing can soak stones near the roof and the framing behind them. We check it from the roof, look for stains in the attic where it is accessible and list any flashing repair on its own line.

Recessing mortar on worn stone

When stones have worn, rounded edges, the brief recommends recessing the final mortar slightly from the face. Filling flush with worn edges makes joints look wider than they are and leaves a thin featheredge of mortar that breaks easily and lets water in.

We set the joint depth to suit your stone. On crisp cut stone, joints can come closer to the face. On weathered fieldstone, a slight recess keeps the repair durable and true to the wall's character.

Acid cleaners and stone

Preservation guidance keeps chemical cleaners, acids above all, off dry masonry, and has the wall wetted thoroughly before any chemical and rinsed well after it. One manufactured stone maker rules out acid and acid-based products entirely.

Acid can etch some natural stones and discolor cast stone. We start with water and mild detergent, test anything stronger on a hidden spot and tell you in writing what was used and why.

Scheduling stone work around cure and cleaning

A stone job has three parts on the calendar, the working days, the first days of curing and the wait before any real cleaning. Planning them together avoids surprises, such as a planned party with fresh joints still covered.

We book the work around your plans and the forecast, tell you when the covers come off and give you the date when the stone can be cleaned beyond a dry brushing.

Quick stonework facts for Wedgefield chimneys

Missing your question? Our Wedgefield masons will answer it by phone.

Can I pressure wash my stone chimney?

We advise against it. One manufactured stone maker rules out power washing, sandblasting, wire brushes and acid cleaners, and high pressure can erode mortar joints on natural stone too. A mild detergent and a bristle brush are the safer start.

Do you repair the chimney cap on a stone chimney?

Yes, as a separate line. The cap or crown sheds water off the top of the chimney, and a failed cap can be why stones are loosening below. We note its condition during the stone inspection and price any cap or crown work on its own.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376