Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney masonry repair for homes in Wedgewood Groves

Cracked joints and loose brick repaired with mortar matched to your chimney. Free inspection from our local family-owned team in Wedgewood Groves.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Line by line, your masonry proposal in Wedgewood Groves

Checked up close on the chimney in Wedgewood Groves, then written into your free estimate.

  1. Crack pattern, width and location
  2. Removal of old caulk, patches and loose mortar
  3. Debris control and cleanup
  4. 10% off within 72 hours after the inspection, shown on the estimate

Masonry repair explained for Wedgewood Groves homeowners

Questions every Wedgewood Groves homeowner should have answered before chimney masonry is cut out.

Hairline cracks and face grouting

Brick Industry Association Technical Note 46 describes face grouting as an option for small hairline cracks in mortar joints. A fluid grout is brushed into the cracks, usually in two coats, after the joints are dampened.

The trade-off is appearance. The note warns that grouted joints look slightly wider and less textured, because the sand in the original mortar no longer shows. Where the joints are deteriorated rather than hairline cracked, repointing is the better repair, and we explain which applies before either is priced.

Matching mortar color wet and dry

Mortar looks darker wet than dry, so a match judged at the mixing board can look wrong a week later. Technical Note 46 advises comparing new samples with the existing mortar wetted, then comparing fully dried samples with the existing dry mortar.

Where only part of a chimney is repointed, the new mortar should match the existing color. We mix and compare samples before the repair and tell you honestly how close the finished joints should read.

Stopping the water before the repair

One rule closes the brick industry's maintenance guidance. If a masonry problem is moisture related, the source of the moisture should be found and corrected before other repairs begin.

On chimneys, the usual suspects are the crown, the cap, the flashing, open joints and anything that sprays or spills onto the brick. We look at each, and any repair outside the masonry scope appears on its own line, so the new brick and mortar are not left fighting the same water.

Finding brick that matches

Brick varies by maker, era and batch, and Technical Note 46 notes that locating matching brick may take considerable effort. Size matters as much as color, since a unit that is a little too long or tall changes every joint around it.

We compare candidates against the existing brick in daylight and tell you how close each one comes. Where sound bricks from the repair area can be cleaned and reused, they often give the closest match of all. The estimate says whether the proposed brick is new, reclaimed or salvaged from the chimney itself.

What people in Wedgewood Groves ask about chimney cracks

Masonry questions we hear most around Wedgewood Groves, answered plainly.

Do cracked mortar joints mean my chimney is unsafe?

Not usually on their own. Hairline cracks and worn joints are maintenance items, while wide cracks, cracks through several bricks, stepped or diagonal patterns and a leaning chimney point to movement that needs a closer look. We tell you which you have.

Can you take an old antenna bracket off the chimney?

Yes, as part of a masonry repair. The residential code says a chimney should not carry loads beyond its own weight unless designed for them. We remove old brackets and repair the anchor holes and any joints they damaged.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376