Electric fireplace installation from local pros in West Colonial
Flame and warmth without a vent. Our West Colonial crew installs electric fireplaces to the maker's instructions after a free inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Line by line, your electric fireplace proposal in West Colonial
Each item below is checked at your West Colonial home against the unit's manual and appears in the estimate you approve.
- Plug-in or hardwired connection, per the manual
- Electrical work by an electrician, listed on its own line
- Wall mount bracket anchored to framing
- Workmanship warranty on the installation we perform
Electric fireplace installation explained for West Colonial homeowners
Our team in West Colonial walks every homeowner through points like these.
No extension cords or power strips
Plug-in electric fireplaces draw real current when the heater runs. Makers are direct about it. Dimplex's XHD firebox manual says to always plug the fireplace directly into a wall outlet and never use it with an extension cord or a relocatable power tap.
If the nearest outlet is too far away, the answer is a properly placed outlet, not a longer cord. We plan the fireplace position around existing outlets where possible and list a new outlet as electrical work where it is not. It keeps the setup safe and tidy.
Reading the rating label
Every electric fireplace carries a rating label with its model and electrical information, such as voltage and wattage or amperage. On Dimplex's IgniteXL models, the manual points to a label on the top of the unit.
That label is how we check the unit against the circuit it will use. It also helps the electrician if one is involved. We note the figures on your estimate and in your records, so anyone who works on the fireplace later knows what it draws without pulling it out of the wall.
Closing drafts behind an insert
An old fireplace opening is connected to the chimney above it, which means moving air, stray debris and sometimes water. Dimplex's XHD manual says to seal all drafts and vents in an existing opening with a non-fibrous insulation material to prevent chimney debris from falling onto the unit.
We close the damper or the throat as the insert manual directs and seal the openings around it. The work is listed on your estimate, and we note what was done, so anyone who looks at the chimney later knows the opening has been closed off.
Seeing the flame from where you sit
A fireplace mounted too high loses its flame effect from a sofa, and one mounted too low can be hidden by a coffee table. Where you sit and how far away you are both matter.
We check the view from your main seats before fixing the height. Some makers recommend a height range for the best viewing angle, and we start there and adjust with you. The final height is written into the plan so the framer and electrician work to the same number.
Other work in West Colonial
-
-
-
-
-
-
Learn more about electric fireplace installationWest Colonial services
Before your electric fireplace install in West Colonial
If your question is not here, our West Colonial team is a phone call away.
Can every electric fireplace be recessed into a wall?
No. The manual lists the mounting styles each model allows, and a unit made to hang on the surface may need open space around its vents. We check your model before planning any opening.
What happens to my old fireplace doors and grate?
We remove them and take them away as part of the job, and the removal is listed on your estimate. If you want to keep any of it, tell us and we will set it aside.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.