Your fireplace repair team in West Colonial
One local team for masonry and factory-built fireplace repair, with listed parts and a 100% satisfaction guarantee.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Parts and finishes on your West Colonial fireplace estimate
- Damper handle, rod, chain or linkage
- Lintel over the opening and where it bears
- Outside air control and duct where fitted
- Room protection and cleanup
Fireplace repair from the grate to the damper
Wood fireplace repair reaches past the firebox
People tend to picture wood burning fireplace repair as fixing cracked brick at the back of the box. The firebox is only one part of the system. A wood fire also works the damper, the throat above it, the hearth in front, the lintel over the opening and the doors or screen that keep sparks in.
Heat and ash wear each of those parts in a different way. A steel plate may warp or rust over time, while joints open, tile loosens as a hearth moves and screen mesh wears thin. A plan that looks at one part can miss the one that caused the call.
On a service call we follow the path of the fire, from the grate up to the damper, and record each finding separately. You decide what to fix now and what can wait, with our honest view on which items affect safe use and which are cosmetic.
Old firebox patches made with the wrong material
Plenty of fireboxes have been patched before. Some patches are sound refractory work. Others are caulk, ordinary mortar, wall filler or a paint-on coating that closed a crack for a season, then cracked, crumbled or peeled away.
Firebrick belongs in medium-duty refractory mortar under the Florida Building Code, so a patch made with something else has to come out before a proper repair goes in. Left in place, it gives the new mortar a poor surface to grip, and the crack can return along the same line.
Old patches give themselves away by color, texture and how they respond to a probe. We cut them out with care for the brick around them. Spots where old patches have failed are marked on the estimate, which shows you why the repair covers more than the crack you first saw.
Glass door frames on a masonry fireplace
Glass doors on a masonry fireplace are held to the face or inside the opening by clamps, brackets or masonry anchors. Over time the frame can loosen, brackets can bend in the heat and the doors can sit crooked, leaving gaps at the sides.
A loose frame rattles and can come away from the opening when the doors are pulled. Frames forced into an opening of the wrong size also put stress on the face around them.
Our technicians check the frame fit, the fixings and the face behind them. We tighten or replace mounting hardware, reset a frame that has shifted and tell you if the opening needs a different frame altogether. Replacement doors are sized to the opening and installed to the door maker's instructions. The estimate names the parts and the fixing method, so a later owner knows how the doors are held.
Mesh curtains and screens that sag or tear
NFPA advises a sturdy fireplace screen to stop sparks flying into the room. Many fireplaces have mesh curtains that hang from a rod and slide open, and those curtains can tear, sag, wear through at the bottom or come off their rings.
A gap at the side, a hole low in the mesh or a curtain that will not close fully lets sparks and rolling embers reach the hearth and beyond. A freestanding screen that does not fit the opening does the same thing.
Torn mesh is replaced, rods and rings are renewed and curtains are adjusted so they meet in the middle. On factory-built units, screens come from the maker's parts list. For masonry fireplaces, we measure the opening and fit a screen that covers it. Screen parts are listed with their sizes, which makes a future replacement simple.
Other work in West Colonial
-
-
-
-
- Prefab and Zero-Clearance Fireplace RepairRepair the fireplace according to its model.
- Stone Chimney RepairKeep stone repairs suited to the existing masonry.
Learn more about fireplace repair and serviceWest Colonial services
Related fireplace repair work
-
-
-
-
Your fireplace repair questions, answered
Do you repair factory-built fireplaces as well as masonry ones?
Yes. We read the label, confirm the model and repair factory-built units with the maker's listed parts, while masonry fireplaces are repaired with firebrick and refractory mortar. The estimate says which approach applies to yours.
Should I light a fire to show you the problem?
No. Leave the fireplace cold and describe what you saw, when it happened and what the fire was like. Our technician checks it cold, which is safer, and your description fills in how the fire behaved.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.