Chimney sweep and fireplace cleaning in Zellwood
Every sweep in Zellwood ends with a visual check and a written record you keep.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The written scope of a chimney cleaning
- Damper plate, frame and pivot cleaned
- Debris bagged and carried out of the house
- Written record of deposits and areas cleaned
- Metal chimney cap removed and reset per its maker
What goes into a proper chimney sweep
Setting the damper before you light
A damper left partly closed is one of the conditions EPA guidance links to faster creosote buildup, because it restricts the air that moves smoke up the chimney. It can also send smoke out the front of the opening.
Factory-built fireplaces follow their own manuals. One owner's manual for a factory-built model, for example, calls for its damper to be fully open whenever the fireplace is in use. For a masonry fireplace, move the handle to its fully open position and confirm it by looking up with a flashlight before the match is struck.
During the sweep, our crew shows you the open and closed positions of the control if they are not obvious. That small step helps you avoid a smoky start and a flue that coats faster than it should.
Workmanship warranty and 100% satisfaction on every sweep
Every sweep and every repair from our crew is backed by our workmanship warranty and our 100% satisfaction guarantee. If something about the cleaning is not right, tell us, and we work it out with you under that guarantee. None of that depends on the size of the job.
That promise rests on how the work is done. The room is protected before brushing, the debris is collected and carried out, the damper is tested before the crew leaves and the written record shows what was cleaned. Soot where it should not be falls under our workmanship warranty.
The written record also draws the line on what the guarantee covers. A crack found during the sweep is a finding, not something the sweep caused or fixed, and it is quoted separately. The same terms apply on every visit.
Fireplace cleaning and flue cleaning are different jobs
Fireplace cleaning is the part you can see, meaning the firebox walls and floor, the grate, the glass doors and the face around the opening. Chimney flue cleaning covers the passage above the damper, all the way to the cap.
A fireplace that looks clean from the room can still have a coated flue, and a swept flue leaves soot in the firebox until someone cleans it out. Fireplace chimney cleaning done properly covers both, along with the damper, smoke chamber and smoke shelf that sit between them.
When you ask for a sweep in Zellwood, our estimate lists each area that will be cleaned, so you can see that the flue is included and not only the firebox. If you want only the visible part cleaned before a showing or an event, we can do that too, and the estimate will say so.
Brushing a flue that bends or offsets
Not every flue runs straight. Masonry chimneys sometimes shift sideways to clear a roofline or a second fireplace, and factory-built chimneys use elbow sections to route around framing. The Florida Building Code limits how far a clay flue lining may slope from vertical, so masonry bends are gentle, but they are still bends.
A stiff rod and brush can skip across the outside of a bend and miss the inside corner. Our technicians use flexible rods for offsets and work the brush through the bend from both ends when both can be reached.
Offsets also hide things. Debris can lodge in the bend, and the visual check can see only so far past it. For a flue with an offset, the written record notes what could be seen and what could not.
Other work in Zellwood
-
-
-
-
-
-
Learn more about chimney sweep and chimney cleaningZellwood services
Related chimney sweep work
Chimney sweep questions in Zellwood
Can you clean a factory-built fireplace and its metal chimney?
Yes. We follow the maker's care instructions, use brushes that will not scratch the metal flue and reset the cap the way the system was designed. Any damaged part is quoted with a matching replacement listed for that system.
What should I do before the sweep arrives?
Let the fireplace go cold for at least a day, clear a path to the hearth and move fragile items off the mantel. Keep pets in another room, and leave the damper and any insert as they are for our crew.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.