Your old fireplace, fitted with a gas insert in Falcon Trace
Local pros who clean and check the chimney before a gas insert in Falcon Trace is ever connected to it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The fit check for your Falcon Trace fireplace
The same written scope shows 10% off when you book within 72 hours after the inspection.
- Vertical vent height checked against the insert's minimum and maximum
- Plates or insulation closing the gap around the liners at the damper
- Gas supply work by a qualified gas professional, on its own line
- Workmanship warranty and the 72-hour 10% discount shown on the estimate
Inside a gas insert installation in Falcon Trace
How our Falcon Trace crew orders the work, and which decisions stay yours.
Keeping insulation off the vent
The vent carries hot exhaust, and the manual is firm about the space around it. Heat & Glo warns installers not to pack the air space around the vent with insulation or other materials, because that can lead to overheating and fire.
At the damper, we use only the non-combustible material the manual allows, in the way it allows it. Everywhere else, the liners run through the open chimney with the clearance their instructions give them.
Who runs the gas line
The gas supply to an insert is a piece of work in its own right. Heat & Glo's manual says gas line installation and service must be performed by a qualified installer or plumber following the applicable codes, which it names as NFPA 54 and the current International Fuel Gas Code.
Your estimate lists the gas line as a separate item and names who will do it, so you know before install day. Our team coordinates the timing, so the line is ready when the insert is set and the connection can be checked before the surround goes on.
The screen in front of the glass
Insert glass gets hot enough to burn. Heat & Glo requires a decorative barrier front to prevent direct contact with the hot viewing glass, says it must be ordered when the fireplace is purchased and warns against operating the fireplace with the barrier removed.
If a barrier is damaged later, the owner's manual says to replace it with the maker's barrier for that appliance. We put the barrier on your order from the start and fit it before the first fire.
Accessories from the approved list
Fans, lights, fronts and remotes are all accessories, and makers limit which ones may be used. The Supreme manual says to use only the maker's approved optional accessories and warns that non-listed accessories could create a safety hazard and void the warranty.
We order accessories from the approved list for your model and install each one to its own instructions. If you want to add one later, we check it against the same list first.
Other work in Falcon Trace
-
-
-
-
-
Learn more about gas fireplace insert installationFalcon Trace services
Gas fireplace insert FAQs for Falcon Trace
Answers from the family-owned team that fits gas inserts in Falcon Trace.
Does the fireplace inspection in Falcon Trace cost anything?
Nothing at all. Our installer measures the fireplace in your Falcon Trace home, answers your questions and leaves a written estimate, and you decide in your own time.
Do I have to remove my mantel for an insert?
Not if it meets the insert's clearance table. We measure its height and depth against the table for your model. If it falls short, we explain the choices before anything is ordered.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.