Rebuild your chimney above the roofline in Lake Richmond
Partial or full, your Lake Richmond chimney rebuild comes with upfront pricing, no hidden fees and a 100% satisfaction guarantee.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your chimney rebuild estimate in Lake Richmond, item by item
A rebuild is only as good as its plan. Here are four of the items we pin down in Lake Richmond.
- Roof, gutter and landscape protection
- Original brick sorted for reuse
- Permit needs confirmed before work
- Written care notes for the new masonry
Planning the rebuild at your Lake Richmond home
Rebuild notes from the family-owned masons who work in Lake Richmond.
Relaying the section above the roof
The part of a chimney above the roof is exposed on every side, so it tends to fail first. Relaying it usually means taking the crown, the top courses and any loose units down to firm brick, then building back up in full mortar joints.
For homes in Lake Richmond, this top-section rebuild is often the job that restores a chimney without touching the rest. It also gives our crew a chance to reset the flashing, check the liner and measure the finished height before the new crown goes on.
Three feet above the roof penetration
The Florida Residential Code, section R1003.9, sets a minimum height for masonry chimneys. The top has to sit 3 feet or more over the highest point where it leaves the roof, and it must also rise 2 feet past any part of the house that stands within 10 feet.
A rebuild is the natural moment to confirm that your chimney meets that rule. Our crew in Lake Richmond measures from the roof penetration and checks nearby ridges and walls before the new courses go up, so the finished top is built to the right height the first time.
Setting clay liners in refractory mortar
Clay flue tiles are not laid in the same mortar as the brick around them. The code calls for medium-duty, water-insoluble refractory mortar at the liner joints, and it limits the air space between liner and masonry to no more than the liner's own thickness.
When a rebuild includes new tile in your Lake Richmond chimney, our masons set each joint in refractory mortar and keep the liner aligned as the brick rises. Mixing up the two mortars is a shortcut that shows up later as open liner joints.
Why stronger mortar is not always better
It seems logical that the hardest mortar makes the strongest chimney. Industry guidance says otherwise. Technical Note 8B recommends the mortar with the lowest compressive strength that still meets the job's requirements.
Mortar that is much harder than the brick can push stress into the units, and the brick faces pay for it. On rebuilds in Lake Richmond, the new mortar is matched to the brick in use, especially where new courses meet older, softer masonry below the boundary. The mortar type we pick is written down so the next repair can follow it.
Other work in Lake Richmond
-
-
-
-
-
Before your chimney rebuild in Lake Richmond
Questions that come up on rebuild visits in Lake Richmond, answered plainly.
What mortar do you use for rebuilt courses?
We choose a mortar type suited to the brick and to the older masonry it joins, following industry guidance to use the lowest strength that meets the job. The type is named in the estimate.
Do you offer a discount on rebuilds?
Book within 72 hours after your free inspection and take 10% off, and a chimney rebuild qualifies. The discount appears on your written estimate before you approve the work.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.