Chimney chase cover replacement in Park Lake/Highland
Measured over the siding, shaped to drain and fastened through the skirt. That is how our local team replaces chase covers in Park Lake/Highland.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
How we price chase covers in Park Lake/Highland
- Open gap at the pipe kept as the manual directs
- Visible pipe casing and joints looked over
- Water test on the finished top where footing allows
- Written record of the installed cover
How a new chase cover keeps Park Lake/Highland chases dry
Skirt depth and the drip edge
The skirt is the cover's bent-down edge that wraps over the top of each chase wall. It must reach past the top edge of the siding so wind-driven rain cannot blow up under it. At the bottom, a drip edge kicks outward so water falls clear instead of running back along the metal into the wall. Fireplace manuals list a turndown and drip edge as required parts of a chase top, and we set the skirt depth after seeing the wall finish at the top of your chase.
The air space around the pipe inside the chase
Inside the chase, the factory-built chimney pipe needs a stated clearance to wood framing and insulation. One manufacturer lists two inches for its chimney series, and manuals also call for firestops where the pipe passes each floor level. With the cover off, we look down into the top of the chase and see whether insulation, debris or a nest has crept into that space. Anything we find is written down, and work outside the cover job is priced separately for your approval.
When the chimney is masonry instead
A solid masonry chimney does not take a chase cover. Its top is closed by a mortar or concrete crown, with a cap over the flue. If your chimney is brick or block all the way down, the job you need is more likely chimney crown repair or a new flue cap, and we can advise which. A framed chase around a metal pipe is where a chase cover belongs. The inspection settles which kind you have on the first visit.
Scheduling the inspection and the installation
Chase cover work usually takes two visits. The first is the free inspection, where we measure, look at everything we can reach and write the estimate. The second is installation, after the cover has been fabricated to those measurements. Same-day service is available for many inspections in Park Lake/Highland, and we give you an expected fabrication window when you approve the work. If the old cover is leaking badly in the meantime, we talk through temporary protection. If you are comparing quotes, the free inspection gives you a written scope you can hold other proposals against.
Other work in Park Lake/Highland
-
-
-
-
-
-
Learn more about chimney chase cover replacementPark Lake/Highland services
Related chase cover work
Your Park Lake/Highland chase cover questions, answered
What is the difference between a chase cover and a chimney cap?
The chase cover is the broad metal lid over the framed enclosure. The cap is the smaller hooded part on the chimney pipe. Either can rust, and we identify which one needs work before quoting.
Do I need to be home for the work in Park Lake/Highland?
For the inspection, someone should let us look at the fireplace inside. Installation happens on the roof, so it can often be done while you are out, as long as access is arranged.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.