Restore an old fireplace in Washington Shores
Sound parts kept, failed parts replaced and every repair listed in writing for your Washington Shores home.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The restoration scope we write for Washington Shores homes
Each item below is checked at your Washington Shores home and listed in the estimate you approve.
- Fireplace type and your goal for its use
- Hearth and hearth extension condition
- Water entry traced before firebox repairs
- Written restoration record at handover
Restoration details that matter in Washington Shores
Notes from the family-owned team that restores fireplaces in Washington Shores.
Restoring the fireplace in stages
Not every restoration has to happen at once. When the work splits naturally, safety and function come first, such as the damper, the firebox lining and the smoke chamber. Appearance work like face cleaning can wait for a later visit.
A phased plan still needs the right order. A freshly cleaned face should not be scuffed by later firebox work, and new hearth tile should not go down before the hearth support is checked. Your written estimate for the home in Washington Shores shows each stage in sequence.
Replacement firebrick that meets the code
Firebrick for a masonry fireplace must meet ASTM C27 or ASTM C1261, and a firebrick lining must be at least 2 inches thick under the Florida Building Code. Replacement brick is chosen to match the existing lining in size and thickness so the new section sits flush.
Where a whole panel of the firebox needs new brick, it is laid with joints no wider than the code allows. Our Washington Shores estimate marks the areas of lining to be replaced, so you can see how much of the original firebox stays.
A warped damper plate
Heat can warp a damper plate until it no longer lies flat on its frame. The gap wastes conditioned air while the fireplace is idle and lets moisture and insects in from the flue.
We check the fit with the damper closed. A slight warp can sometimes be corrected. A plate that no longer seats is replaced with one sized for the frame, or the whole damper is replaced, and the estimate explains which approach suits your fireplace in Washington Shores.
Wood framing near the fireplace
The code keeps wood beams, joists and studs 2 inches or more away from the front and sides of a masonry fireplace, and 4 inches or more from its back wall. Those spaces sit inside walls and floors, so they are easy to forget during a remodel.
Framing cannot be seen without opening a wall, and we do not guess about it. When signs such as scorching, heat-darkened trim or earlier alterations suggest a clearance problem, we explain what checking it would involve.
Other work in Washington Shores
-
-
-
-
-
-
Learn more about fireplace restorationWashington Shores services
Your Washington Shores restoration questions, answered
Questions we hear during free inspections in Washington Shores.
What mortar goes inside the firebox?
Refractory mortar made for firebox heat. The Florida Building Code calls for medium-duty refractory mortar meeting ASTM C199 for laying firebrick, and ordinary masonry mortar does not belong inside a firebox.
Can you restore a small fireplace built for coal?
Sometimes. Coal fireplaces are small and shallow, and a full wood fire in one can smoke and overheat the firebox. We explain what the design allows before you decide how to use it.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.